Welcome
to 
MATHIASEN
MACHINERY, INC.
Looking for NEW MACHINERY...Mathiasen Machinery,
Inc. is now
the exclusive America's (North, Central and South America) agent for
Wire and Cable Machinery GmbH and PRATTO SA. Please contact us with
your machinery
requirements. Click on the WICA
and PRATTO
logo for more information.
MMI Buys and Sells new and used Wire and Cable, Tube and Fastener machinery. Navigate the site using the links in the Categories list to the left. Or see list below for the most recent additions to our inventory. If you have any questions or cannot find what you are looking for , please contact Mike or Mark Mathiasen at: Tel.: 860-873-1423, FAX: 860-873-8866, Email: mmi@mathiasen-machinery.com
Click on item type to see a list of available machines.
|
MISCELLANEOUS
Spools, Dies, Chill Heat Exchangers, Compressors... |
|
The following is a partial list of machinery available as of MAY 9, 2024
Click
on the highlighted
Reference numbers
for more information.
|
Machine Description |
|
|
High Frequency Annealing Lines |
|
|
Niehoff VG30 inline Resistance Annealer (27 ga –
15 ga) |
|
|
Cemco 20 Strand Annealing Furnace, 2150 Degree
F, 1989 |
|
|
Bendel Cooling Chambers, 20 Strands, 30 ft long,
3 available |
|
|
Strand Annealing Line |
|
|
Lee Wilson 80 X 90 inch Bell Annealer |
|
|
Patenting Line with oil tempering .120 to .283
inch diameter |
|
|
SAET Induction Bright Annealing Furnace for
Stainless Steel Tubes (never used) |
|
|
Strand Annealing oven 900 C, 120 ft long, 30
wires, 2 to 4 mm |
|
|
Sargeant and Wilbur mdl NAC 0101228-4T Strand
Annealer |
|
|
Conveyor Tunnel Annealing Line 463 lbs/hour,
Year 2016 |
|
|
Holcroft Annealing Oven for 3000 lb steel wire
coils. 1600 F, Natural Gas, 9 zones |
|
|
Cable Trade (Ceeco head) BX Interlock Armoring
Machine with Capstan |
|
|
Vitari 2.7 mm Double or Triple Wire (Iowa) |
|
|
Wafios STH2 1.6 to 2.8 mm Barbed Wire Machines
(3 available) |
|
|
Wafios (MRP) Loop Wire (Bar Tie) Model SV1, 1 to
1.6 mm diameter, up to 350 mm length |
|
|
MEP Syntax 20, Year 2004, 6 to 16
mm diameter 2 Wire up to 12 mm |
|
|
OSCAM Smart Futura Cutting and
Bending robot line |
|
|
Schnell 12R Stirrup Bender single
plane, up to #4 rebar (2 available) |
|
|
AIM CNC Wire bending 3 machines
available |
|
|
14-149 |
Schilt Flexbar 300 AE Automatic
Rebar Shear Line |
|
14-150 |
Schnell Prima 12 |
|
14-151 |
Schnell Barwise 26 |
|
14-152 |
Progress EBAS 12 |
|
SPIRKA DFT24A, 24 Carrier Braider, Year 1998 |
|
|
OMA 24 carrier Braider, Type
24/1-190 MV/ECDX |
|
|
TMW 24, 36 and 48 Carrier Maypole Braiders |
|
|
15-155 |
NEB 24 Carrier, Model CB-1 wire or textile |
|
OMA 16 carrier Textile Braiders (10 available, 5
sets of 2) |
|
|
Wardwell 16 Carrier Braiders textile (15 avail) |
|
|
Wardwell 24 Carrier like new condition |
|
|
Braiders Horizontal, TMW, Carter |
|
|
Macbee 60 inch Diameter Sidewinder |
|
|
Vaughn 26 inch diameter Bull Block |
|
|
RMG 24 inch Draw Block, 20 HP motor |
|
|
16-228 |
Drahtziehmaschine Two Blocks from a 5 die
drawing line, 1991, Model SDA 600 |
|
BW DRW6/3 Full triple draw bull block, ent 10 mm
year 2007 |
|
|
Vaughn 26 inch diameter block, 60 HP motor |
|
|
21 inch diameter Block, 20 HP motor |
|
|
Fastener Engineering DTH-1520-95-24 inline draw
block, 59880 in/lbs |
|
|
Inverted Bull Block 48 inch diameter enter .75
inch (19 mm), with coiler |
|
|
Bull Block 36 inch diameter enter .5 inch (17.7
mm) 150 HP |
|
|
16-238 |
Bull Block 30 inch diameter enter .313 inch (8
mm) |
|
Sidewinder Coiler enter 26 mm (1.02 inch)
diameter |
|
|
Fastener Engineering 28 inch Diameter in-line
bull block with rotating straightener |
|
|
Herborn Double Deck bull block enter 12mm, 600
mm diameter block |
|
|
WMCA 30 inch (760 mm) Cord Twister |
|
|
Godderidge DT Buncher 24 inch (630 mm) Year 1997 |
|
|
Bartell 630 mm Double Twist, 3000 tpm (13
available) |
|
|
MGS 30 inch double twist Buncher |
|
|
17-312 |
Watson Kinrei NB450-R, 450 mm Double Twist |
|
SAMP 760 mm Double Twist Bunchers |
|
|
17-329 |
Northhampton 630 mm double twist |
|
Pratech 1250 mm Double Twist Cabler |
|
|
SAMP BM/560-D, 560 mm Double Twist Buncher |
|
|
Kinrei NB 450 Double Twist Bunchers |
|
|
Hamana 600 mm DT Buncher (3 available) |
|
|
SKET 800 mm Double Twist Steel Wire Buncher
year: 2006, 5/8 inch elevator rope |
|
|
Entwistle Twinner 22 inch |
|
|
17-373 |
Pourtier Twinning machines 3 units |
|
CABLETRADE Caterpillar Capstan 120 inch (10 ft)
(3 m) Length |
|
|
WMCA Dual Wheel Capstan 33 inch Diameter |
|
|
MAPRE 86 inch Caterpillar Capstan |
|
|
Davis Electric 36 inch Cat-Puller Capstan, 2 HP |
|
|
Davis Standard 36 inch caterpuller capstan , no
controls L to R |
|
|
48 inch caterpillar capstan, no controls R to L |
|
|
Lesmo Model UTF 1600 Caterpillar Capstan, Year
2008, 63 inch |
|
|
Hall Caterpillar Capstan 60 inch |
|
|
18-163 |
Davis Standard 24 inch beltwrap captan. |
|
19-138 |
Wafios AF-30, 2 Meter Width, 50 X 50 mm |
|
19-140 |
Vitari MG1 Chain Link 2 available; 1-2000mm
width, 1-3000mm width |
|
Wafios DF32 and AFD 250 Compact Wider |
|
|
Tunatek TT66-S Automatic Chain Link Fence Machine |
|
|
Bergandi 2MT, 11ft 8 inch wide, 1990’s updated
control |
|
|
Wafios VDF 80 Chain link Fence |
|
|
Morgan 24 inch drawing Dead Block Coiler (2) |
|
|
Renco 22 inch drawing Dead Block Coiler |
|
|
Breitenbach 24 inch dia. Dead Block Coiler |
|
|
Bongard Coiler TW51/480, 480 mm (19 inch) dia.
Block (2 avail) |
|
|
Vaughn 24 inch Dead Block Coiler, 40 HP with
Turntable |
|
|
Niehoff 30 inch drop down coiler |
|
|
Whitacre 3 head Drop Coiler, 16 inch diameter,
30 inch Turntables (Wire Take-up) |
|
|
Lamnea Bruk Multi head Coilers 26 inch |
|
|
Morgan Koch Multi Head Coilers 26 inch |
|
|
Syncro ContinuCoil 30 inch diameter |
|
|
20-201 |
MRB 30 inch Dead Block, 50 HP |
|
20-202 |
20 Station Drop Down Coiler, 30 inch blocks, 2 HP |
|
20-203 |
10 Station Drop Down Coilers, 30 inch, 40 HP
each block |
|
Bongard TW51/S Drop Coiler, 420 mm (16.5 in)
diameter block, Speed: 16.7 m/sec. |
|
|
Morgan 22 inch diameter Block, 15 HP motor
(Cleaned and Painted) |
|
|
20-207 |
Frigerio Turn Table for 6000 mm dead block
coiler (never used) |
|
Hazelett Corp. CCr 11.2 MT/Hr. Copper Rod Caster |
|
|
Properzi 5 Ton per Hour continuous copper rod
caster |
|
|
Outokumpu Upcast 16 Lines, 8 mm Copper Rod,
12,000 mt/year, year of mfg. 1992 |
|
|
Outokumpu 13 Lines, 12,000 tons per year, Year
of Mfg 1999 |
|
|
Southwire Copper Continuous caster 27 tons per
hour |
|
|
Up Caster 10 Strands 8mm diameter, 2000 tons/year |
|
|
DESCALER/CLEANING |
|
|
Pickling Line 400 tons/day |
|
|
BANFI Bar Shot Blast Descaler Shapes and Rounds
4 inch max diameter, 1980 |
|
|
Schumag KZRP IVB, 60 mm max diameter Combined
Drawing Machine |
|
|
Schumag KZRP I-A Round: 4.0 mm to 13.0 mm;
Shapes: 4.0 mm to 15.0 mm |
|
|
Schumag Centerless Grinder up to 22 mm |
|
|
Schumag IB and (3) X IIB machines used on tube. |
|
|
Schumg KZRP IV-B, Year 2005, 53 mm Steel Round
Bar |
|
|
Talleres Gabande .5 inch to 2 inch Round, Hex,
Square bars (58 HP) |
|
|
|
|
|
Davis Standard 2 inch, 24:1 extruder and cooling
trough |
|
|
Davis Standard 3.5 inch, 24 to 1 Extruder (100
HP Motor, Motor Control, and heat panel) |
|
|
27-282 |
Baicheng 80 mm, 120 mm and 175 mm Triple
Extrusion |
|
Maillefer 60 mm, 24:1 Extruder |
|
|
27-288 |
Royal 1A Extruder only |
|
27-289 |
Davis Standard 2.5 inch 24:1 Complete Line |
|
FACS 120 mm Extruder and Motor 25:1 |
|
|
UNA-DYN 300 Hopper dehumidifier dryer |
|
|
Genca 1 inch 24:1 Piggyback Extruder, missing
temp gauges. |
|
|
Royle 3.5 inch 18:1 water cooled extruder with
temp panel |
|
|
Wuxi Nanfang Electromachanical 150 mm 25:1,
Extrusion Line |
|
|
27-296 |
Extruder 100 mm, 10 kW motor |
|
Nextrom Extruders for physical foam (3 available) |
|
|
Colortronic Air Dehumidifying Dryer with storage |
|
|
WICA 90 mm Extruder Year 2019, never used |
|
|
Davis Standard 6” dia, 24:1 complete Extrusion
Line. |
|
|
Robertson Lead Extruder (only extruder) |
|
|
Troester PXA 60/25D (2 available) Year 2019 |
|
|
27-309 |
SAMP Salt Curing Silicone Extrusion Line |
|
27-310 |
Extrusion Lines 3 available 1.75 inch, 2 inch
and 2.5 inch still installed |
|
27-311 |
Wayne Extrusion Line 1.25 inch 24 to 1 cooling
trough, capstan and take-up |
|
27-312 |
Entwistle High Temp Extrusion line, new controls
installed 2015 |
|
27-313 |
Folk and Sandelin lead extruder No po no tu no.
4 11" die block |
|
27-314 |
Nokia Maillefer tandem drawing insulating line |
|
CONFORM AND EXTRUSION
PRESSES |
|
|
BWE Model 400, 22 mm feed stock |
|
|
Copper/Brass Tube Extrusion Press 1,200 MT,
Billet Heater and Draw Benches |
|
|
28-122 |
Chinese 285/90 conform single wheel |
|
29-117 |
Saspi Thread Roller with pointer, (18 mm) |
|
29-118 |
Saspi Thread Roller with pointer, (12 mm) |
|
Nut and Screw Formers National 5/8 and ½ inch,
Nut Tap and Drill Tipper machines |
|
|
National Standard Cold Header Bolt Maker BM-20 |
|
|
National Bolt makers and Peltzer Thread Rolling
7/8 inch bolt max |
|
|
Bolt Cold headers 10 machines M12 to M250 |
|
|
JERN YAO JBF-24B4S 01-54, year 2001 Bolt Former |
|
|
National Standard BM12 Bolt former |
|
|
Wafios SF-23 Hex Fence 2 available 2.2 meter, ½
and 1 inch spacing |
|
|
Wafios SF21 X 1/2 inch, Vitari
2 meter, Wafios Rewinder &Vitari Spring Coilers |
|
|
30-142 |
Wafios HFD 22 X 2 inch, Wire diameter 0.85 to
1.8 mm, Width 2.2 m Hexagonal |
|
NOVAS Hexagonal Mesh End Winder, 2 m width, 80 X
100 and 60 X 80 mm Mesh |
|
|
Wafios HD Hexagonal Fence Machine |
|
|
Bekaert Model RTA105 Hexagonal Fence machine |
|
|
Fence Plant |
|
|
ITO Continuous Lead Sheathing Extruder Type
YQL-150/5, 35 Kg/min. This line is in like new condition. Year of Mfg.:
2011 |
|
|
EVG G5 2.4 M 50 X 50 mm, Complete
Line in storage |
|
|
EVG KFR 804 (4
available 1965, 69, 73, 88) |
|
|
EVG GR 65 -1979 65 inch (1650 mm)
width |
|
|
EVG LGR/48 2.5 to 8 mm, 1993 |
|
|
FROMA PM 15/1500 2.5 to 8 mm Mesh Welder |
|
|
Schlatter GS1 2400 mm wide, 4 to 6 mm diameter |
|
|
AARDINC CNC LP 100 Mesh Welder |
|
|
EVG GZF 85-HP 2250 mm, 1 to 3 mm 1987 still in
operation |
|
|
EVG G32S/102 2.7 to 12 mm, 2600 mm wide, coil
take-up |
|
|
TUNATEK TT11 2500 mm wide Mesh Welder, New 2018 |
|
|
Schlatter PG12 upgraded with servo feed system.
Guillotine (no cutting blades) |
|
|
Schlatter MG-12.4/3C 480V, with welding robot |
|
|
Schlatter MG24 1985 mesh stacking 2500 mm, 4-10
mm. |
|
|
Schlatter MG28, S3000 mm, 4-10 mm 70-100
stroke/min |
|
|
EVG ATT 3-meter weld width, 3.5
to 8 mm diameter |
|
|
34-264 |
EVG ATT 102, 2.75
m wide, 2.5 to 8 mm diameter, Year of mfg: 2009 |
|
34-265 |
Rumpf Fence Panel Welders (2
available) |
|
Schlatter PG12 1 to 5 mm, 1.2
meters wide, line wire from coil, cross wire pre-straighten |
|
|
Jager NSA 2500 Meah Welder, wire
dia. .5 to 2 mm, 5 to 100 mm mesh, with crimping |
|
|
Vitari, Type: CAM, 1.5 to 2.5 mm diameter Fence
Staples |
|
|
Wafios S40 Nail Machine .8 to 1.8 mm, 6.5 to 40
mm length |
|
|
KOVOPOL Nail Machines (7 Available) |
|
|
Wafios N3, N5 and N6, 3.1 to 5.2 mm, 13 to 145 mm |
|
|
Vitari, Moroni, Wafios Nail Machines and wire
drawing complete plant |
|
|
Nail plant Wafios S-140, 2 X Heenan Froude ,
Wafios Tooling Grinder, Wafios Tumbler |
|
|
Nail Plant with Wire drawing with Wafios N6, N5,
N3 and other mfg nail machines |
|
|
Wafios S300 nail machine, 4 to 10 mm, 50-300 mm
length, 150 nails/min. |
|
|
Vitari Nail Machines 4 avail Models 1 X V20R, 3
X V17R, and Nail Polisher |
|
|
Enkotec ME-01 2.2 X 50 mm to 3.4 X 90 mm |
|
|
Kovopol Nail Machines year 2013 |
|
|
Wafios N4, N5, N51, N140, S110 and S125, Kavopol
THA80 Nail Machines |
|
|
Wafios DSC 29 Fence Staple Machine with barb
cutter. Installed and operational. |
|
|
Wafios N5 2.2-4.2 mm, 13-105 mm |
|
|
Wafios N51 2.2-4.2 mm, 13-105 mm, 430 NPM |
|
|
38-138 |
Davis Electric MDL 18 M10, 18 inch dia. Shaft
Type Pay-off (3 available) |
|
38-139 |
Sterling Davis 24inch shaft type motorized
pay-off |
|
Davis Electric Pay-off 96 inch diameter |
|
|
Filmtec Shaftless Pay-off 30 inch diameter |
|
|
Reel-O-Matic Model HJ15, Shaft Type, 15,000 Lbs,
36 to 108 inch X 72 inch wide |
|
|
Shaft Type Pay-off with Dancer Arm Speed Control |
|
|
Tulsa Shaftless Power Pay-off |
|
|
Shaft Type Powered Pay-off 24 inch dia, 5 inch
arbor |
|
|
Tulsa Shaftless 24 inch Dia high speed |
|
|
4000 lb coil pay-off for fin to intermediate
wire drawing (2 available) |
|
|
W.I.C.A. Pay-off 400 to 800 mm diameter, 1000 Kg
(year of Mfg 2018 never used) |
|
|
Watson 12 head (4
avail) and 7 head (5 avail) fine wire motorized tension brake PO |
|
|
38-211 |
TEC Neutralizer Pay-offs 24 inch dual wire (4
avail) |
|
Reel-O-Matic HJ-15P Shaft Type 108" Diameter
power pay-off, 15,000 lb |
|
|
Acrowire Coil Turntable Pay-off 4,000 lbs.,
54-inch diameter Hydraulic speed Control |
|
|
Complete Nail, Mesh Manufacturing Plant. Wire Drawing, Nail Making and Mesh Welding. |
|
|
39-190 |
BAR Manufacturing equipment Schumag, Aetna,
peeling straightening DSC |
|
Fiber optic, Instrument Cable Plant |
|
|
40-132 |
Henrich Electro Tin Line GV-0164.A with dual
spooler |
|
40-136 |
Tinning line 15 inch x 82 inchl Pot, gas fired 6
strand fine can run 6 ran 2 |
|
Electrolytic Tin/Silver plater |
|
|
2mm to 4.5mm electro galvanizing line |
|
|
NEPCO Electro-galvanizing basket line (new 2002) |
|
|
|
|
|
Davis Electric Dual 18 inch Collapsible Coil
Take-up |
|
|
Rewind line 96inch dia Davis Electric Pay-off
with Entwistle 96inch TU |
|
|
Huestis 36 inch rewind line |
|
|
43-171 |
Huestis 12 inch diameter shaft type with counter |
|
14 Shaft Type take-ups and PO’s. 7 with trav. 7
Without trave. Up to 24 inch diameter |
|
|
Kenrack/reel-o-matic rewinders 16" max 3
available |
|
|
Carl Wezzel 12 Stand Rolling Mill ent 12 to 17
mm Copper |
|
|
Fenn Turks Heads 4TH (2 avail) |
|
|
44-170 |
Two stand Decco Rollex mill with powered edger
and a set of side rolls |
|
44-171 |
Twin capstan Decco Rollex drawing with payoff
and take-up |
|
Torrington 3 Stand Rolling Mill Complete line |
|
|
Fenn 2 Stand Rolling Mill Complete Line |
|
|
Fenn 4 Stand |
|
|
DEM 4 Stand for 13 mm 1060 Carbon Steel, year
2012 |
|
|
Hi-Draw .06 inch turks head wire shape Mill |
|
|
Fuhr Turks Head Shape Line |
|
|
|
|
|
Vaughn Roll Pointer Two 4 inch diameter Rolls, ½
inch and down 10 groove |
|
|
Vaughn and Morgan 7/16 inch, 2 roll pointers (9
available) |
|
|
Pointer / Stringer for Copper Rod |
|
|
Morgan 2 roll pointer, 10 groove, .25 to .055
inch 1.5 HP |
|
|
Vaughn 7/16 inch Cleaned and painted |
|
|
Syncro Pointer Stringer |
|
|
45-150 |
Syncro Pointer Stringer |
|
Watson Binding Head, Configuration 8 + 8, 5 inch
opening |
|
|
Custom Built Steel Taping Head |
|
|
46-120 |
US Machinery Taping Line Mdl LST1025-2-3 |
|
Mica dual taping line |
|
|
Kalmark Dual Eccentric Taping Head new 2018
Never Used |
|
|
Mali Dual Eccentric Taping head |
|
|
Neihaus 20 inch Tangential Tape Head |
|
|
Dual Concentric tape head |
|
|
Entwitle five head taping line, capstan wheel PO
and TU |
|
|
USM triple head taper, Cat Capstan, No Take-up |
|
|
SPRING COILING |
|
|
Torin model W10A spring Maker .008 to .028 inch
diameter wire |
|
|
|
|
|
STRAIGHTEN AND CUT |
|
|
Lewis 2CV, 1C Straighten and cuts with 12 foot
runout |
|
|
Lewis 4C Straighten and Cut |
|
|
Schuster 1A Straighten and Cut |
|
|
Kierserling WRPH 230, 30 to 230 mm Bar
Straightener |
|
|
Shuster 2A .125 to .312 mild steel 8 foot runout |
|
|
EVG DR-HS 6 mm, 6 m/sec, Year 2009 |
|
|
Vitari 5 to 10 mm diameter |
|
|
Danieli 2 inch Bar Straightener, 2 Plane |
|
|
Vitari Model NR320, 4 to 12 mm, 6 m run, 1992 |
|
|
RMG Model 28, up to ½ inch steel rod, year of
mfg 2015, 12 ft runout |
|
|
RMG .062 to .187 inch (1.58 to 4.75 mm) 12 ft
runout |
|
|
Patterson .062 to .250 inch (1.58 mm to 6.35 mm) |
|
|
Koch WD1, Straighten and Cut 8 to 14 mm, year
1989 |
|
|
Eurobend MELC 16 X 5 wire rebar S&C and
bundle machine yr 2007 |
|
|
49-265 |
EVG RA-XE 16/5 With DBE 8 mm to 16 mm Dia 800 mm
to 12 m length |
|
49-166 |
Progress ESR 16, 6 to 16 mm dia, 140 m/min |
|
PLANETARY
STRANDERS / ARMORING |
|
|
TRAFALGAR 12+18, 22 inch Planetary Strander
Capstan and take-up |
|
|
Hamana (Japan) 3+1, 75 inch with taping and 102
in take-up |
|
|
New England Butt 8 inch diameter 6+1 Planetary
Strander. For insulated cable |
|
|
Tulsa 12+12 Planeatry 36" x 20" reels 1200lbs |
|
|
50A-191 |
Trafalgar 6 pos. 54" 6000 lbs per reel |
|
50A-192 |
Caballe 24+36 22" x 12" trav. Used for armoring |
|
50A-193 |
Dongguan Qing Feng Electrical Machine 6+6 X 12
inch diameter complete line |
|
Trafalgar 6 Bay, 3 X 72 inch diam and 3 X 36
inch diameter Planetary Closer |
|
|
Watson 4 Bay 54 inch diameter planetary no
capstan no take-up |
|
|
Trafalgar Tubular Strander 19 wire, 6+12, 400 mm
dia. Complete line |
|
|
50B-281 |
MGS 18 Bay 6 inch tubular stranders (4 Available) |
|
De Angeli 6+1, 30 inch diameter Tubular Strander |
|
|
Bartell 3+1, 24 inch with Capstan, Pay-off and
Take-up |
|
|
Bartell B62, 6 Bay inside string (6
Avail) |
|
|
Bartell 6 Bay B62 outside string-up |
|
|
WMCA 12 Bay, 6.5 inch Control Cable
Tubular Strander |
|
|
Bartell B64, 6 Bay outside String
10 inch diameter reels (10 avail) |
|
|
Stolberger 1+12, 500 mm, encircling
bearing Tubular Stranding Line |
|
|
50B-313 |
Bartell B62, 18 Bay Outside string |
|
50B-316 |
BEMA 8 Bay, 700 mm Tubular |
|
WMCA 7 bay, 24 inch diameter
Tubular Strander with Cap and TU |
|
|
Bartell B62 6 bay inside string 3
available all right hand |
|
|
Watson Rigid Strander, 6+12+18, 22 inch diameter |
|
|
Cortinovis 16 inch Diameter Rigid Strander
1+6+12+18 |
|
|
Armoring Cage 52 wires, 400 mm |
|
|
Watson 61 Wire 6+12+18+24, 24 inch |
|
|
50C-157 |
Cortinovis 12+18, 630 mm X 420 mm OAW |
|
50C-158 |
Gauder 6+12+18, 630 mm X 325 mm OAW |
|
50C-159 |
Cortinovis 12+18+24, 700 mm X 400 mm OAW |
|
Krupp 1+6+12+18, 27 inch Rigid Stranding Line |
|
|
1+6+12+18+24, 400 mm Rigid Stranding Line |
|
|
Queins/Caballe 6+12, 630 mm Rigid Stranders
motors no control |
|
|
DRUM TWISTERS |
|
|
Pourtier 2500 mm Drum Twister, 1992, 80 rpm |
|
|
Caballe 1250 mm Drum Twister, 1995, 180 rpm |
|
|
Caballe 1250 mm Drum Twister,
1992, 180 rpm |
|
|
Ceeco 2240 mm (88 in) Drum Twister, 1986, 1800
mm Rotating Pay-off, Rotating Cat Capstan |
|
|
2500 mm Drum Twister, Year 2002, 100 mm cable
diameter. |
|
|
Torrington 5/8 inch 4 die Swager |
|
|
Fenn 3 F Swager |
|
|
Torrington 4 Die Swager, Yr. 2000 |
|
|
FENN 8FS Stationary Swager 3.4 inch capacity
Solid |
|
|
FENN 4F Swager 15/16 inch Solid Capacity 2.25
inch Tube, 4 Die |
|
|
51-143 |
Torrington mdl 211 Swager 2 die |
|
51-144 |
Torrington Mdl 3 Swager 2 die |
|
51-145 |
FENN 5F Swager |
|
|
|
|
Davis Electric 24inch dual Take-up |
|
|
Sket 10 inch diameter shaft type spooler |
|
|
Davis Electric 16 inch Parallel axis Dual Spooler |
|
|
Syncro DFH 30 inch diameter Bare Wire Spoolers
(2 available) 10 HP |
|
|
Syncro DFH 30 inch diameter Bare Wire Spoolers
(3 available) 20 HP |
|
|
Niehoff 800 mm Vertical Static Spooler |
|
|
KOCH KHS 1000 Spooler Steel Wire 800 mm Flange
Diameter |
|
|
Lamnea Bruk DSPM 5000 spooler, year 2000 |
|
|
Lamnea Bruk VSPM 2500 spooler, year 2000 |
|
|
Niehoff 500 mm Dual Spooler, full speed change
over, electrics updated 2009 |
|
|
BHS Single Head Pail Pack 14 inch, (10 Available) |
|
|
Wyrepak 6 Head Pail Pack/Barrel Packer |
|
|
WYRE PAK 20 inch X 10 inch Barrel Packers (2
avail) |
|
|
53-240 |
Davis Standard dual extruder line take up 22
inch 24 inch x 1 inch arbor 11. inch tarverse |
|
53-249 |
Bartell 30 inch shaft type take-up motorized |
|
Trafalgar 84 inch Shaftless Take-up |
|
|
Bartell 10 Inch Diameter Belt Driven Shaftless
Take-ups (10) |
|
|
EMG 34 head shaft type take-up |
|
|
Reel-O-Matic 15,000 lb, 96 inch, with traverse. |
|
|
Skaltek 26T 1200 to 2600 mm diameter, 12,000 kg |
|
|
Davis Standard 30 inch dual spooler |
|
|
New England Butt 50 inch shaft type |
|
|
Stainless Steel Tube Forming and Welding line |
|
|
55-122 |
Copper tube drawing plant 3,000 tons per year |
|
SMS Meer Tube Drawing and Coiling block |
|
|
MRB SCHUMAG tube Coiler type : VNC 84 |
|
|
Tube forming mill |
|
|
Pulzer CNC 25L Tube Bender 25 mm diameter tube 2
m long |
|
|
Tensitron model TR-2000 HC Mechanical Tension
Meters |
|
|
Phenix Tech. AC Dielectric Test System Model
6TCE15-105X |
|
|
Instron 1011 Dual Column Benchtop Tensile /
Compression Tester |
|
|
Sikora and Beta Laser Diameter control |
|
|
|
|
|
Jager Model SD600, 48 inch width (two available) |
|
|
Jager Model RG200 1 to 6 mm diameter, 2200 mm
width
Deiters
KA-7 crimping machine |
|
|
57-118 |
Jager 3 machines, 7- pick/min, .1 to .7 mm and 6
Trinca |
|
Micro Weld Wire Annealers |
|
|
58-164 |
Heintz Koldweld Butt Welder 1H
H334 A, 1/4inch Aluminum, 3/16inch Copper |
|
Microweld J8A Aluminum Rod Butt
Welder |
|
|
Micro Weld J8C Copper Butt Welder |
|
|
Microweld Butt Welder Model E1C
Capacity .015 to .050 (0.38 mm – 1.3 mm) Copper |
|
|
Schlatter Type M Butt Welder |
|
|
Ideal Butt Welder DSF 090, 1.5 to
5 mm Copper |
|
|
H&W Pressure Welding Mdl.:
M101 |
|
|
PPWC Koldwelders (2 available)
Mdl 5 and 5 ER, Year 1998 |
|
|
Heintz Corp. Mdl. KBM5 cold
pressure welders (2 available) |
|
|
Microweld J5C (3 available) .08
to .25 Copper |
|
|
Microweld J7C .125 to .375 copper |
|
|
Microweld J5C Butt Welder |
|
|
Microweld GP-1 8 to 20 awg Copper
Strand |
|
|
BWE Cold Welder Model CW4E Air
operated (2 Available) |
|
|
Fastener Engineering Model BW-500 |
|
|
Microweld Model J45C .081 to .182
inc (2 to 4.6 mm) Copper |
|
|
BWE Cold Welder Model CW2E |
|
|
Microweld Model J4C, 110 V .050
to .125 inch (1.27 to 3.175 mm) Brass/Bronze |
|
|
Microweld Model J7C, 460V, .125
to .375 inch (3.175 to 9.53 mm) Copper |
|
|
Microweld Model E1C, 115V, .015
to .05 inch (.381 to 1.27 mm) Copper |
|
|
BWE CW3E Cold Welder |
|
|
PWM Cold Pressure Welder Model
BM10 (2 avail) |
|
|
Koldweld BM9 |
|
|
PWM M-101 Cold Welder |
|
|
Heintz Koldweld BM7 H (2 avail)
no carts |
|
|
Hakusan BFY-19T Coper Stranded
Butt Welder 80 to 400 sqmm |
|
|
58-239 |
Micro Weld J5C .080 to .25 inch |
|
Continue…Butt
Welders for STEEL |
|
|
MicroWeld Butt Welder E1S,
0.020-0.040 steel |
|
|
August Strecker Butt Welder Type
0-SC (4 Available) |
|
|
Schlatter Butt Welder S-2 with
Micro MTAN1 Steel annealer 0.010 - .062inch |
|
|
Schlater Butt Welder S-2.5 with
Micro MTAN-1 Annealer |
|
|
Schlatter Butt Welder Type S-2.5 (25 avail) and Type S-2.0 (2 available) |
|
|
IDEAL Butt Welder DC04 460 V, 0.4
mm Steel |
|
|
IDEAL Butt
Welder DCE 030 460 V, 0.3 mm Steel |
|
|
IDEAL Butt Welder DS3 3 mm,
grinding wheel, 10 amps Steel |
|
|
Microweld Butt Welder MTE-1 .020
–.047 Cord |
|
|
Microweld E1S Butt Welder |
|
|
Ideal DSH 180 Steel Butt Welder
18 mm Max |
|
|
58-219 |
Hakusan Heat Pressure welder for
steel Model BSH -15 5.5 to 14mm |
|
Ideal DSH 090, 460 V50/60 Hz |
|
|
Welding Tech, Inc. Model BT200L
480 V, 200 KVA Diameter Range: 0.5 to 1 inch steel |
|
|
Tainan Cheng I 30 Kva Butt Welder
6 to 18 mm steel 2007 |
|
|
Tainan Cheng I 5 Kva Butt Welder
2.5 to 6 mm steel 2007 |
|
|
Microweld HX .125 to .75 (3.18 to
19 mm) (2 avail) |
|
|
Microweld TH-D .125 to .5 (3.18
to 12,7 mm) |
|
|
Syncro FX-13 Rod Machine Ent 8 mm Finish 3.665
to 1.628 mm |
|
|
Syncro 18T 13 die Tandem Aluminum Rod Drawing
Line |
|
|
Henrich 4 die rod breakdown machine Only (no
Motor) |
|
|
Niehoff M85, VG35V annealer and WF800 Coiler,
2012 |
|
|
Henrich 17 die, Niehoff R500 annealer. Partial
line: no take-up. |
|
|
Sket Rod Machine, Niehoff R500 and Bongard
Coiler 850 mm |
|
|
Niehoff MM85 and Vaughn Copper Rod Drawing Lines |
|
|
4 X 26 inch diameter blocks, 65 HP each block,
ent 12.5 mm copper rod |
|
|
Niehoff M85 8 die, Fin 2 to 3.5 mm, Annealer and
dual Spooler, 1994 |
|
|
Niehoff M-375 13 die Step Cone. |
|
|
SICTRA 13 Die Tadem Drawing Line in storage
ready to ship. |
|
|
SICTRA 13 Die Tadem Drawing Line, Anlr, Dual
Splr and Drop Coiler (Video in production) |
|
|
Vaughn T-57, 6 die enter 9 mm |
|
|
Niehoff M85, 13 Die with Coiler. Year of Mfg 2010 |
|
|
Niehoff MM85 with inline Annealer motor and
controls, No Take-up |
|
|
SICTRA 15 Die Tandem with annealer spooler and
coiler |
|
|
Niehoff M30, VG30 annealer and 22 inch spooler |
|
|
Niehoff M30, VG30 Annealer and S630 Spooler.
(price reduced) |
|
|
Henrich 17 die, enter 3.5 mm Cu, fin 0.4 to 1.2
mm, Anneal and dual spool |
|
|
Niehoff M30, VG30 Annealer and Spooler. |
|
|
SAMP TRB-5 Annealer and Spooler |
|
|
59C-311 |
BG-16 C3 annealer 16 inch spooler 4 available |
|
59C-320 |
Niehoff M15 with annealer and SNH631 Spooler Ent
2 mm Fin .26 to .7 mm |
|
DeAngeli MultiWire ent 1.8 mm fin. 38 to 26 awg,
1990 |
|
|
Syncro AG 16 with Spooler. Installed and
operational |
|
|
Syncro BG 16 with spooler Installed and
operational |
|
|
Niehoff MMH80 8 wire drawing machine, R160
Annealer, 560 mm spooler |
|
|
Samp Mt 12-7-18-bw 7 Wire enter 2.5 mm copper
finish 28 awg |
|
|
Niehoff M25 Ent. 2.51 mm (10awg) Finish .15 to
.70 mm (35 to 21 AWG) |
|
|
Samp 12 wire, Year 1997 W/ dual spooler,
annealer complete running until Jan 2023 |
|
|
Macbee Model 6-24-B/C-60 6 block, 24 inch,
60HP/block, with Spooler |
|
|
Tecnocable 8 Block OTT, no controls no take-up |
|
|
OZ Cams TRD 610/560, yr. 1990 Enter 6.5 mm
finish 2 to 2.5 mm (3 avail) 4, 6 and 8 Blocks |
|
|
Macbee 4 block, 22 inch diameter, 15 HP AC
motors, with spooler (store outside) |
|
|
FENN 5 Block Dry Draw. Ent .406 (10 mm) fin.
.125 to .3 inch HC Steel |
|
|
BHS Torin 5 Die Dry Draw Enter .375 (9.5 mm) fin
.120 to .3 inch HC Steel |
|
|
EuroDraw MTS 900 3 block Enter .531 (13.5 mm)
Fin .250 to .360 in HC Steel +1 8608731423 |
|
|
Morgan 5 Blk, w/ Dead Block Coiler, ent .25 fin
096, 3000 fpm, 100 HP each Blk. |
|
|
60A-313 |
Mekosan 5 block 800 mm, 45 Kw/ block, year 2009,
ABB drive, siemens PLC |
|
60A-315 |
Sket 6 block 500 mm 22 kw/block |
|
60A-316 |
Sket 8 Block 550 mm 30 kw/blk |
|
60A-317 |
Arboga 7 Block incline machine no po no tu,
760mm dia. |
|
60A-318 |
Breitenbach 6 block, 1970s ent 7mm fin 2mm
(still installed and running till Nov 22) |
|
Eurodraw 610 mm, 9 die, 45 Kw (60HP) per block
year 2000 |
|
|
Frigerio 10 block with coiler ent 5.5/6.5 mm,
Year 1988 |
|
|
60A-325 |
Eurodraw Two wire, 14 die with 2 spoolers, 1999 |
|
60B-147 |
11 Die HC ent 3.2 mm fin .89 mm (2 available) |
|
Vaughn 12 HIC, 12 inch dia. Vertical finish
capstan, no control, no spooler |
|
|
OZ Cams TRB 350 Enter 3.5 mm Finish .6 mm (4
Available) 350 mm blocks |
|
|
Frigerio RT500-113 Yr. 1997, ent 4 mm Fin. .6 mm
11 die |
|
|
60C-151 |
Vaughn 12 HF Steel Fine Wire Drawing. 12 Dies,
ent .080 (2 mm) |
|
Koch 25 die, 3 wires, with spooler. Ent. 1.4 mm |
|
|
Vaughn 12 HICX Enter 3.43 mm Low Carbon 2.68 mm
HC with spooler |
|
|
Vaughn 12 HIC Enter 2.68 mm Low Carbon 2.03 mm
HC with spooler |
|
|
Wet Draw Fine Wire 21 dies ent 3 mm finish .45
mm, with take-up |
|
|
60C-165 |
Vaughn 12 HF Wire Drawing |
|
61-105 |
Pettibone 6,000 lb. Fork lift Truck Propane |
|
61-168 |
Conair Extrusion Vacuum pump |
|
61-176 |
5 HP AC motor, 1749 RPM, 230/460 volts, 13.6/6.8
Amps, 60 Hz, 3 Phase |
|
Farrel Rubber Mill 12inch X 6inch rolls 7.5 HP |
|
|
Thermco Gas Mixer 0 to 20 % Model 8400 Hydrogen
and Nitrogen Gas |
|
|
Videojet Ink Jet Printer Model EXCEL 170i |
|
|
Esteves and Ballofet Natural Diamond Dies 0.309
mm to 1.604 mm, 3665 available |
|
|
Natural Diamond Dies 8 mm x 25 mm, Various
sizes, 27,000 available |
|
|
Coil Compactor Steel Coils 3000 lbs |
|
|
Davis Standard vertical dancer 8 inch sheaves |
|
|
TEC Dancer/Accumulator Model MWD-8/40 |
|
|
Agir Shaving Head 18 mm max diameter |
|
|
Accumulator Dancer 24 inch diameter sheaves, 540
ft accum, 25ft high |
|
|
Davis Standard Dancer/Accum, Mdl. M-48-9, Yr.
2007 |
|
|
61-278 |
Tubular Coil Wire Carriers |
|
TEC Dancer HDDA/36 36" sheaves 2" dia. 80 ft
accumulation |
|
|
61-280 |
Tubular carriers 22.5 x 48 x 42 base |
|
Inkjet Printers Imaje 2 X 9040 Contrast and 1 X
Jaime 1000S8 |
|
|
Markem 600S cable taping and cutting.
Self-contained wet cut system |
|
|
61-286 |
Allis Chalmers ACC100 10,000 lb capacity, Propane |
|
Bartell 30 inch take-up traverse unit |
|
|
61-289 |
Filtertech scf-1600 filter system |
|
61-287 |
Copper waste wire and cable recycling separation
of plastic and copper QD600S |
|
REELS, BOBBINS,
and SPOOLS |
|
|
Plastic 6.5 inch x 3-1/2 inch x 4-1/4 inch x
3-1/2 inch drum 5/8 inch arbor |
|
|
22 X 12.75 X 5 inch arbor 130 lbs (30 available) |
|
|
61R-103 |
6.3" 160 mm X 114 X 90 mm traverse plastic reels
brand new 5,000 available |
|
Plastic clip hacoba Bobbins 66mm x 69mm x 16mm;
16,000 Available |
|
|
10" dia. x 6" Trav. X 1 1/4 bore x 4" drum x 7"
OAW weight 3.5 lbs. plastic |
|
|
Steel Reels 60 inch flange X 36 barrel X 30 trav |
|
|
Steel Reels 630 mm to 1200 mm diameter 127 mm
arbor |
|
|
61-241 |
Plastic Spools 6.0 inch OD X 4.25 OAW X 3.5 T X
3.5 BD X ¾ inch arbor (1000) |
|
Steel Reels 44 inch diameter X 28 inch traverse
X 22 inch Barrel X 5 inch Arbor |
|
|
16 and 18 inch steel and plastic reels |
|
|
DRUM TWISTERS |
|
|
Ceeco 3000 mm Armoring |
|
