email us at email@example.com
Furnace in atmosphere controlled for re-cooking brass and copper tubes in bars and coils: system to depurate the internal atmosphere from zinc trace to avoid deposit on the tubes. Production: 400 kg/hour, Width of tape conveyor: 700 mm, Length of heat zone: 4500 mm, Maximum temperature of operation: 750° C, Burners: 12, length of system: 17m + 12m roller transport structure loaded automatic + 12m roller transport structure unloaded automatic, construction year: 1998
Furnace Mfg. GPL, Production: 700 kg/hour, Length of heat zone: 4000 mm, Maximum temperature of operation: 700° C, Burners: 16, length of system: 5000 mm + 8m roller transport structure loaded + 8m roller transport structure unloaded
STRAIGHTENERS / DRAW STRAIGHTEN AND CUT
Automated sawing machine Mfg.: MEP, Model: cobra 350, Cutting capacity: round 120 mm, Cutting length: max 500 mm, Blade Diameter: 350 mm
TUBE DRAW BENCHES:
Tube Drawing machine single draw:
5 ton Mfg.: Frigerio, Tube capacity: max 50 mm, Max tube
length: 12 m
3 ton Mfg.: Frigerio, Tube Capacity: max 40 mm, Max tube length: 7.5 m
Tube Drawing machine Triple draw:
10 ton, tube capacity: max 50 mm, Max tube length 14 m
Electric-generating. Mfg.: IVECO AIFO, natural gas supply, maximum power : 400 kVA = 320KW. a cos fi=0.8, Includes: switchboards and thermal exchanger on the primary circuit of cooling able to regain 320 kW thermic with thermal jump approximately 85/70° C, = 40 mc/h; Sound guard 20'.
Weingarten 200 t mechanics
Band saw Mfg: Upam (2 available)
Air compressor: Mfg.: Pneumofore (2 available), Mfg.: Kaeser (1 available)
REF. #: 55-114
Tube Manufacturing Equipment
Tube Annealing furnace
Manufacturer: The electric Furnace Co.
Heating temperature: 650 320 Degrees C
Speed stepless: 160 sec/m 40 sec/m
To achieve the hardness of the copper tube by annealing. Uses Nitrogen against the oxidizing on the surface of the tube.
Bull block drawing machine
M.R.B Marshall Richards Barcro Ltd
H 54 T, H 45 T
Main motor, 100 hp
Enter 33 mm diameter, Finish 11 to 15 mm Tube
In put straight copper tube maximum length: 26 meters
Winding tube in coil. The O.D is just next to the finished O.D as customer demand.
Combined drawing machine
4 to 30 mm Tube
In put winding copper tube in coil from bull block drawing machine. The O.D is finished product that customer demand, the length can be set. Then cutting automatically. The finish product is straight tube
If you have any questions or would like to receive further information on the above equipment please contact Mark or Mike Mathiasen.
We are always looking for good used Wire and Cable equipment to purchase for stock. Please send us a list of any surplus machinery that you would like to turn into cash.
Please send us your surplus list
M.M.I. OFFERS THE FOLLOWING SERVICES:
COMPLETE PLANT LIQUIDATION’S, CONSIGNMENTS, WAREHOUSING
Please contact us with your machinery requirements!