HomePage 2024


Welcome to MMI Logo MATHIASEN MACHINERY, INC.

Looking for NEW MACHINERY...Mathiasen Machinery, Inc. is now the exclusive America's (North, Central and South America) agent for Wire and Cable Machinery GmbH and PRATTO SA. Please contact us with your machinery requirements. Click on the WICA and PRATTO logo for more information.

MMI Warehouse

MMI Buys and Sells new and used Wire and Cable, Tube and Fastener machinery.  Navigate the site using the links in the Categories list to the left.  Or see list below for the most recent additions to our inventory. If you have any questions or cannot find what you are looking for , please contact Mike or Mark Mathiasen at:
Tel.: 860-873-1423, FAX: 860-873-8866, Email: mmi@mathiasen-machinery.com


Index of machinery types available for sale.
Click on item type to see a list of available machines.


ANNEALERS

ARMORING

BARBED WIRE

BENDING AND FORMING

BRAIDERS

BULL BLOCKS

BUNCHERS / CABLERS / TWINNERS

CAPSTANS

CHAIN LINK FENCE

COILERS

CONTINUOUS CASTERS

DESCALERS

DRAW, STRAIGHTEN AND CUT

DRAW BENCHES

ENAMELING

EXTRUDERS

CONFORM

FASTENERS

FARM FENCE

LEAD PRESS

MESH WELDERS

NAIL MACHINERY

PAPER CLIPS

PAY-OFFS

COMPLETE PLANTS

PLATING / GALVANIZING

PREHEATERS

REWIND LINES

ROLLING MILLS

POINTER / STRINGERS

TAPING / SERVING

STRAIGHTEN AND CUT

PLANETARY STRANDERS

TUBULAR STRANDERS

RIGID STRANDERS

SWAGERS

SPOOLERS / TAKE-UPS

TUBE

TESTING

WEAVING LOOMS

BUTT WELDERS (Non-Ferrous)

BUTT WELDERS (Ferrous)

ROD WIRE DRAWING (Non-Ferrous)

INTERMEDIATE WIRE DRAWING (Non-Ferrous)

FINE WIRE DRAWING (Non-Ferrous)

ROD WIRE DRAWING (Ferrous)

INTERMEDIATE WIRE DRAWING (Ferrous)

FINE WIRE DRAWING (Ferrous)

MISCELLANEOUS Spools, Dies, Chill Heat Exchangers, Compressors...

 


The following is a partial list of machinery available as of March 06, 2024

Click on the highlighted Reference numbers for more information.

REF. No.

Machine Description

ANNEALERS

10-237

High Frequency Annealing Lines

10-240

Niehoff VG30 inline Resistance Annealer (27 ga – 15 ga)

10-241

Cemco 20 Strand Annealing Furnace, 2150 Degree F, 1989

10-242

Bendel Cooling Chambers, 20 Strands, 30 ft long, 3 available

10-243

Strand Annealing Line

10-244

Lee Wilson 80 X 90 inch Bell Annealer

10-248

Patenting Line with oil tempering .120 to .283 inch diameter

10-249

SAET Induction Bright Annealing Furnace for Stainless Steel Tubes (never used)

10-250

Strand Annealing oven 900 C, 120 ft long, 30 wires, 2 to 4 mm

10-254

Sargeant and Wilbur mdl NAC 0101228-4T Strand Annealer

10-255

Conveyor Tunnel Annealing Line 463 lbs/hour, Year 2016

10-256

Holcroft Annealing Oven for 3000 lb steel wire coils. 1600 F, Natural Gas, 9 zones

Return to INDEX

ARMORING

11-124

Cable Trade (Ceeco head) BX Interlock Armoring Machine with Capstan

Return to INDEX

BARBED WIRE

13-127

Vitari 2.7 mm Double or Triple Wire (Iowa)

13-131

Wafios STH2 1.6 to 2.8 mm Barbed Wire Machines (3 available)

Return to INDEX

BENDING AND FORMING

14-129

Wafios (MRP) Loop Wire (Bar Tie) Model SV1, 1 to 1.6 mm diameter, up to 350 mm length

14-140

MEP Syntax 20, Year 2004, 6 to 16 mm diameter 2 Wire up to 12 mm

14-141

OSCAM Smart Futura Cutting and Bending robot line

14-144

Schnell 12R Stirrup Bender single plane, up to #4 rebar (2 available)

14-146

AIM CNC Wire bending 3 machines available

Return to INDEX

BRAIDERS

15-143

SPIRKA DFT24A, 24 Carrier Braider, Year 1998

15-150

OMA 24 carrier Braider,  Type 24/1-190 MV/ECDX

15-154

TMW 24, 36 and 48 Carrier Maypole Braiders

15-155

NEB 24 Carrier, Model CB-1 wire or textile

15-156

OMA 16 carrier Textile Braiders (10 available, 5 sets of 2)

15-159

Wardwell 16 Carrier Braiders textile (15 avail)

15-160

Wardwell 24 Carrier like new condition

15-161

Braiders Horizontal, TMW, Carter

Return to INDEX

BULL BLOCKS

16-221

Macbee 60 inch Diameter Sidewinder

16-222

Vaughn 26 inch diameter Bull Block

16-227

RMG 24 inch Draw Block, 20 HP motor

16-228

Drahtziehmaschine Two Blocks from a 5 die drawing line, 1991, Model SDA 600

16-230

BW DRW6/3 Full triple draw bull block, ent 10 mm year 2007

16-231

Vaughn 26 inch diameter block, 60 HP motor

16-233

21 inch diameter Block, 20 HP motor

16-234

Fastener Engineering DTH-1520-95-24 inline draw block, 59880 in/lbs

16-236

Inverted Bull Block 48 inch diameter enter .75 inch (19 mm), with coiler

16-237

Bull Block 36 inch diameter enter .5 inch (17.7 mm) 150 HP

16-238

Bull Block 30 inch diameter enter .313 inch (8 mm)

16-240

Sidewinder Coiler enter 26 mm (1.02 inch) diameter

16-241

Fastener Engineering 28 inch Diameter in-line bull block with rotating straightener

16-242

Herborn Double Deck bull block enter 12mm, 600 mm diameter block

Return to INDEX

BUNCHERS / CABLERS / TWINNERS

17-256

WMCA 30 inch (760 mm) Cord Twister

17-257

Godderidge DT Buncher 24 inch (630 mm) Year 1997

17-267

Bartell 630 mm Double Twist, 3000 tpm (13 available)

17-273

MGS 30 inch double twist Buncher

17-312

Watson Kinrei NB450-R, 450 mm Double Twist

17-315

SAMP 760 mm Double Twist Bunchers

17-329

Northhampton 630 mm double twist

17-340

Pratech 1250 mm Double Twist Cabler

17-345

SAMP BM/560-D, 560 mm Double Twist Buncher

17-347

Edmands 20 inch outside in twinner. Dual power pay-off and sparker (2 available)

17-348

Kinrei NB 450 Double Twist Bunchers

17-350

Hamana 600 mm DT Buncher (3 available)

17-363

SKET 800 mm Double Twist Steel Wire Buncher year: 2006, 5/8 inch elevator rope

17-366

Entwistle Twinner 22 inch

Return to INDEX

CAPSTANS

18-133

CABLETRADE Caterpillar Capstan 120 inch (10 ft) (3 m) Length

18-153

WMCA Dual Wheel Capstan 33 inch Diameter

18-157

MAPRE 86 inch Caterpillar Capstan

18-158

Davis Electric 36 inch Cat-Puller Capstan, 2 HP

18-159

Davis Standard 36 inch caterpuller capstan , no controls L to R

18-160

48 inch caterpillar capstan, no controls R to L

18-161

Lesmo Model UTF 1600 Caterpillar Capstan, Year 2008, 63 inch

18-162

Hall Caterpillar Capstan 60 inch

18-163

Davis Standard 24 inch beltwrap captan.

18-164

36" beltwrap capstan

Return to INDEX

CHAIN LINK FENCE

19-138

Wafios AF-30, 2 Meter Width, 50 X 50 mm

19-140

Vitari MG1 Chain Link 2 available; 1-2000mm width, 1-3000mm width

19-141

Wafios DF32 and AFD 250 Compact Wider

19-146

Tunatek TT66-S Automatic Chain Link Fence Machine

19-149

Bergandi 2MT, 11ft 8 inch wide, 1990’s updated control

19-150

Wafios VDF 80 Chain link Fence

Return to INDEX

COILERS

20-173

Morgan 24 inch drawing Dead Block Coiler (2)

20-175

Renco 22 inch drawing Dead Block Coiler

20-176

Breitenbach 24 inch dia. Dead Block Coiler

20-180

Bongard Coiler TW51/480, 480 mm (19 inch) dia. Block (2 avail)

20-183

Vaughn 24 inch Dead Block Coiler, 40 HP with Turntable

20-187

Niehoff 30 inch drop down coiler

20-194

Whitacre 3 head Drop Coiler, 16 inch diameter, 30 inch Turntables (Wire Take-up)

20-197

Lamnea Bruk Multi head Coilers 26 inch

20-198

Morgan Koch Multi Head Coilers 26 inch

20-199

Syncro ContinuCoil 30 inch diameter

20-201

MRB 30 inch Dead Block, 50 HP

20-202

20 Station Drop Down Coiler, 30 inch blocks, 2 HP

20-203

10 Station Drop Down Coilers, 30 inch, 40 HP each block

20-204

Bongard TW51/S Drop Coiler, 420 mm (16.5 in) diameter block, Speed: 16.7 m/sec.

20-205

Morgan 22 inch diameter Block, 15 HP motor (Cleaned and Painted)

20-207

Frigerio Turn Table for 6000 mm dead block coiler (never used)

Return to INDEX

CONTINUOUS CASTERS

21-161

Hazelett Corp. CCr 11.2 MT/Hr. Copper Rod Caster

21-165

Properzi 5 Ton per Hour continuous copper rod caster

21-166

Outokumpu Upcast 16 Lines, 8 mm Copper Rod, 12,000 mt/year, year of mfg. 1992

21-167

Outokumpu 13 Lines, 12,000 tons per year, Year of Mfg 1999

21-168

Southwire Copper Continuous caster 27 tons per hour

21-169

Up Caster 10 Strands 8mm diameter, 2000 tons/year

Return to INDEX

DESCALER/CLEANING

22-122

Pickling Line 400 tons/day

22-123

BANFI Bar Shot Blast Descaler Shapes and Rounds 4 inch max diameter, 1980

Return to INDEX

DRAW, STRAIGHTEN AND CUT

23-156

Schumag KZRP IVB, 60 mm max diameter Combined Drawing Machine

23-160

Schumag KZRP I-A Round: 4.0 mm to 13.0 mm; Shapes: 4.0 mm to 15.0 mm

23-161

Schumag Centerless Grinder up to 22 mm

23-168

Schumag IB and (3) X IIB machines used on tube.

23-171

Schumg KZRP IV-B, Year 2005, 53 mm Steel Round Bar

Return to INDEX

DRAW BENCHES

24-117

ZTS Triple Draw Bench 100 Ton, 1982, 105 mm (4 inch)

24-118

Talleres Gabande .5 inch to 2 inch Round, Hex, Square bars (58 HP)

 

ENAMELING

Return to INDEX

EXTRUDERS

27-255

Davis Standard 2 inch, 24:1 extruder and cooling trough

27-281

Davis Standard 3.5 inch, 24 to 1 Extruder (100 HP Motor, Motor Control, and heat panel)

27-282

Baicheng 80 mm, 120 mm and 175 mm Triple Extrusion

27-286

Maillefer 60 mm, 24:1 Extruder

27-288

Royal 1A Extruder only

27-289

Davis Standard 2.5 inch 24:1 Complete Line

27-191

FACS 120 mm Extruder and Motor 25:1

27-192

UNA-DYN 300 Hopper dehumidifier dryer

27-193

Genca 1 inch 24:1 Piggyback Extruder, missing temp gauges.

27-294

Royle 3.5 inch 18:1 water cooled extruder with temp panel

27-295

Wuxi Nanfang Electromachanical 150 mm 25:1, Extrusion Line

27-296

Extruder 100 mm, 10 kW  motor

27-297

Nextrom Extruders for physical foam (3 available)

27-300

Colortronic Air Dehumidifying Dryer with storage

27-301

WICA 90 mm Extruder Year 2019, never used

27-303

Davis Standard 6” dia, 24:1 complete Extrusion Line.

27-305

Robertson Lead Extruder (only extruder)

27-308

Troester PXA 60/25D (2 available) Year 2019

27-309

SAMP Salt Curing Silicone Extrusion Line

27-310

Extrusion Lines 3 available 1.75 inch, 2 inch and 2.5 inch still installed

27-311

Wayne Extrusion Line 1.25 inch 24 to 1 cooling trough, capstan and take-up

27-312

Entwistle High Temp Extrusion line, new controls installed 2015

Return to INDEX

CONFORM AND EXTRUSION PRESSES

28-120

BWE Model 400, 22 mm feed stock

28-121

Copper/Brass Tube Extrusion Press 1,200 MT, Billet Heater and Draw Benches

Return to INDEX

FASTENERS

29-117

Saspi Thread Roller with pointer, (18 mm)

29-118

Saspi Thread Roller with pointer, (12 mm)

29-122

Nut and Screw Formers National 5/8 and ½ inch, Nut Tap and Drill Tipper machines

29-123

National Standard Cold Header Bolt Maker BM-20

29-124

National Bolt makers and Peltzer Thread Rolling 7/8 inch bolt max

29-125

Bolt Cold headers 10 machines M12 to M250

29-127

JERN YAO JBF-24B4S 01-54, year 2001 Bolt Former

29-128

National Standard BM12 Bolt former

Return to INDEX

FARM FENCE

30-138

Wafios SF-23 Hex Fence 2 available 2.2 meter, ½ and 1 inch spacing

30-141

Wafios SF21 X 1/2 inch,  Vitari 2 meter, Wafios Rewinder &Vitari Spring Coilers

30-142

Wafios HFD 22 X 2 inch, Wire diameter 0.85 to 1.8 mm, Width 2.2 m Hexagonal

30-143

NOVAS Hexagonal Mesh End Winder, 2 m width, 80 X 100 and 60 X 80 mm Mesh

30-144

Wafios HD Hexagonal Fence Machine

30-145

Bekaert Model RTA105 Hexagonal Fence machine

39-175

Fence Plant

Return to INDEX

LEAD PRESS

32-100

ITO Continuous Lead Sheathing Extruder Type YQL-150/5, 35 Kg/min. This line is in like new condition. Year of Mfg.: 2011

Return to INDEX

MESH WELDERS

34-196

EVG G5 2.4 M 50 X 50 mm, Complete Line in storage

34-201

EVG KFR 804 (4 available 1965, 69, 73, 88)

34-207

EVG GR 65 -1979 65 inch (1650 mm) width

34-226

EVG LGR/48 2.5 to 8 mm, 1993

34-234

FROMA PM 15/1500 2.5 to 8 mm Mesh Welder

34-235

Schlatter GS1 2400 mm wide, 4 to 6 mm diameter

34-238

AARDINC CNC LP 100 Mesh Welder

34-248

EVG GZF 85-HP 2250 mm, 1 to 3 mm 1987 still in operation

34-250

EVG G32S/102 2.7 to 12 mm, 2600 mm wide, coil take-up

34-254

TUNATEK TT11 2500 mm wide Mesh Welder, New 2018

34-255

Schlatter PG12 upgraded with servo feed system. Guillotine (no cutting blades)

34-259

Schlatter MG-12.4/3C 480V, with welding robot

34-260

Schlatter MG24 1985 mesh stacking 2500 mm, 4-10 mm.

34-261

Schlatter MG28, S3000 mm, 4-10 mm 70-100 stroke/min

34-263

EVG ATT 3-meter weld width, 3.5 to 8 mm diameter

34-264

EVG ATT 102,  2.75 m wide, 2.5 to 8 mm diameter, Year of mfg: 2009

34-265

Rumpf Fence Panel Welders (2 available)

34-266

Schlatter PG12 1 to 5 mm, 1.2 meters wide, line wire from coil, cross wire pre-straighten

34-267

Jager NSA 2500 Meah Welder, wire dia. .5 to 2 mm, 5 to 100 mm mesh, with crimping

Return to INDEX

NAIL AND STAPLE MACHINERY

35-185

Vitari, Type: CAM, 1.5 to 2.5 mm diameter Fence Staples

35-198

Wafios S40 Nail Machine .8 to 1.8 mm, 6.5 to 40 mm length

35-199

KOVOPOL Nail Machines (7 Available)

35-200

Wafios N3, N5 and N6, 3.1 to 5.2 mm, 13 to 145 mm

35-201

Vitari, Moroni, Wafios Nail Machines and wire drawing complete plant

35-202

Nail plant Wafios S-140, 2 X Heenan Froude , Wafios Tooling Grinder, Wafios Tumbler

35-204

Nail Plant with Wire drawing with Wafios N6, N5, N3 and other mfg nail machines

35-208

Wafios S300 nail machine, 4 to 10 mm, 50-300 mm length, 150 nails/min.

35-209

Vitari Nail Machines 4 avail Models 1 X V20R, 3 X V17R, and Nail Polisher

35-210

Enkotec ME-01 2.2 X 50 mm to 3.4 X 90 mm

35-212

Kovopol Nail Machines year 2013

35-213

Wafios N4, N5, N51, N140, S110 and S125, Kavopol THA80 Nail Machines

35-214

Wafios DSC 29 Fence Staple Machine with barb cutter. Installed and operational.

35-216

Wafios N5 2.2-4.2 mm, 13-105 mm

31-217

Wafios N51 2.2-4.2 mm, 13-105 mm, 430 NPM

Return to INDEX

PAY-OFFS

38-138

Davis Electric MDL 18 M10, 18 inch dia. Shaft Type Pay-off (3 available)

38-139

Sterling Davis 24inch shaft type motorized pay-off

38-171

Davis Electric Pay-off 96 inch diameter

38-191

Filmtec Shaftless Pay-off 30 inch diameter

38-199

Reel-O-Matic Model HJ15, Shaft Type, 15,000 Lbs, 36 to 108 inch X 72 inch wide

38-200

Shaft Type Pay-off with Dancer Arm Speed Control

38-201

Tulsa Shaftless Power Pay-off

38-200

Shaft Type Powered Pay-off 24 inch dia, 5 inch arbor

38-201

Tulsa Shaftless 24 inch Dia high speed

38-203

4000 lb coil pay-off for fin to intermediate wire drawing (2 available)

38-207

Littell Self Centering Collapsible Coil Payoff 2000 lbs

38-209

W.I.C.A. Pay-off 400 to 800 mm diameter, 1000 Kg (year of Mfg 2018 never used)

38-210

Watson  12 head (4 avail) and 7 head (5 avail) fine wire motorized tension brake PO

38-211

TEC Neutralizer Pay-offs 24 inch dual wire (4 avail)

38-212

Reel-O-Matic HJ-15P Shaft Type 108" Diameter power pay-off, 15,000 lb

38-213

Acrowire Coil Turntable Pay-off 4,000 lbs., 54-inch diameter Hydraulic speed Control

Return to INDEX

COMPLETE PLANTS

39-183

Complete Steel wire drawing and Electro-Plating Plant

39-186

Complete Nail, Mesh Manufacturing Plant.  Wire Drawing, Nail Making and Mesh Welding.

39-190

BAR Manufacturing equipment Schumag, Aetna, peeling straightening DSC

39-191

Fiber optic, Instrument Cable Plant

39-192

Telephone wire drawing, extruding and Cabling

Return to INDEX

PLATING / GALVANIZING

40-132

Henrich Electro Tin Line GV-0164.A with dual spooler

40-136

Tinning line 15 inch x 82 inchl Pot, gas fired 6 strand fine can run 6 ran 2

40-137

Electrolytic Tin/Silver plater

40-140

2mm to 4.5mm electro galvanizing line

40-142

NEPCO Electro-galvanizing basket line (new 2002)

40-143

OZ CAM/FIB Electroplating Lines Zn and Cu on Steel

Return to INDEX

PREHEATERS

 

 

Return to INDEX

REWIND LINES

43-129

Davis Electric Dual 18 inch Collapsible Coil Take-up

43-149

Rewind line 96inch dia Davis Electric Pay-off with Entwistle 96inch TU

43-167

Huestis 36 inch rewind line

43-171

Huestis 12 inch diameter shaft type with counter

43-172

14 Shaft Type take-ups and PO’s. 7 with trav. 7 Without trave. Up to 24 inch diameter

43-175

Kenrack/reel-o-matic rewinders 16" max 3 available

Return to INDEX

ROLLING MILLS

44-164

Carl Wezzel 12 Stand Rolling Mill ent 12 to 17 mm Copper

44-168

Fenn Turks Heads 4TH (2 avail)

44-170

Two stand Decco Rollex mill with powered edger and a set of side rolls

44-171

Twin capstan Decco Rollex drawing with payoff and take-up

44-177

Torrington 3 Stand Rolling Mill Complete line

44-178

Fenn 2 Stand Rolling Mill Complete Line

44-179

Fenn 4 Stand

44-180

DEM 4 Stand for 13 mm 1060 Carbon Steel, year 2012

44-181

Hi-Draw .06 inch turks head wire shape Mill

44-182

Fuhr Turks Head Shape Line

 

POINTER / STRINGERS

45-144

Vaughn Roll Pointer Two 4 inch diameter Rolls, ½ inch and down 10 groove

45-145

Vaughn and Morgan 7/16 inch, 2 roll pointers (9 available)

45-146

Pointer / Stringer for Copper Rod

45-147

Morgan 2 roll pointer, 10 groove, .25 to .055 inch 1.5 HP

45-148

Vaughn 7/16 inch Cleaned and painted

45-149

Syncro Pointer Stringer

45-150

Syncro Pointer Stringer

Return to INDEX

TAPING / SERVING

46-108

Watson Binding Head, Configuration 8 + 8, 5 inch opening

46-118

Custom Built Steel Taping Head

46-120

US Machinery Taping Line Mdl LST1025-2-3

46-123

Mica dual taping line

46-124

Kalmark Dual Eccentric Taping Head new 2018 Never Used

46-125

Mali Dual Eccentric Taping head

46-127

Neihaus 20 inch Tangential Tape Head

46-129

Dual Concentric tape head

46-130

Entwitle five head taping line, capstan wheel PO and TU

46-131

USM triple head taper, Cat Capstan, No Take-up

Return to INDEX

SPRING COILING

48-107

Torin model W10A spring Maker .008 to .028 inch diameter wire

 

STRAIGHTEN AND CUT

49-236

Lewis 2CV, 1C Straighten and cuts with 12 foot runout

49-238

Lewis 4C Straighten and Cut

49-239

Schuster 1A Straighten and Cut

49-242

Kierserling WRPH 230, 30 to 230 mm Bar Straightener

49-245

Shuster 2A .125 to .312 mild steel 8 foot runout

49-246

EVG DR-HS 6 mm, 6 m/sec, Year 2009

49-250

Vitari 5 to 10 mm diameter

49-251

Danieli 2 inch Bar Straightener, 2 Plane

49-253

Vitari Model NR320, 4 to 12 mm, 6 m run, 1992

49-255

RMG Model 28, up to ½ inch steel rod, year of mfg 2015, 12 ft runout

49-256

RMG .062 to .187 inch (1.58 to 4.75 mm) 12 ft runout

49-257

Patterson .062 to .250 inch (1.58 mm to 6.35 mm)

49-259

Koch WD1, Straighten and Cut 8 to 14 mm, year 1989

49-260

Eurobend MELC 16 X 5 wire rebar S&C and bundle machine yr 2007

Return to INDEX

PLANETARY STRANDERS / ARMORING

50A-172

TRAFALGAR 12+18, 22 inch Planetary Strander Capstan and take-up

50A-188

Hamana (Japan) 3+1, 75 inch with taping and 102 in take-up

50A-189

New England Butt 8 inch diameter 6+1 Planetary Strander. For insulated cable

50A-190

Tulsa 12+12 Planeatry 36" x 20" reels 1200lbs

50A-191

Trafalgar 6 pos. 54" 6000 lbs per reel

50A-192

Caballe 24+36 22" x 12" trav. Used for armoring

50A-193

Dongguan Qing Feng Electrical Machine 6+6 X 12 inch diameter complete line

50A-194

Trafalgar 6 Bay, 3 X 72 inch diam and 3 X 36 inch diameter Planetary Closer

50A-195

Watson 4 Bay 54 inch diameter planetary no capstan no take-up

Return to INDEX

TUBULAR STRANDERS

50B-242

Trafalgar Tubular Strander 19 wire, 6+12, 400 mm dia. Complete line

50B-281

MGS 18 Bay 6 inch tubular stranders (4 Available)

50B-282

De Angeli 6+1, 30 inch diameter Tubular Strander

50B-298

Bartell 3+1, 24 inch with Capstan, Pay-off and Take-up

50B-302

Bartell B62, 6 Bay inside string (6 Avail)

50B-307

Bartell 6 Bay B62 outside string-up

50B-308

WMCA 12 Bay, 6.5 inch Control Cable Tubular Strander

50B-310

Bartell B64, 6 Bay outside String 10 inch diameter reels (10 avail)

50B-311

Stolberger 1+12, 500 mm, encircling bearing Tubular Stranding Line

50B-313

Bartell B62, 18 Bay Outside string

50B-316

BEMA 8 Bay, 700 mm Tubular

50B-317

WMCA 7 bay, 24 inch diameter Tubular Strander with Cap and TU

50B-318

Bartell B62 6 bay inside string 3 available all right hand

50B-319

Bartell 12 Bay B62, Inside string-up

Return to INDEX

RIGID STRANDERS

50C-135

Watson Rigid Strander, 6+12+18, 22 inch diameter

50C-149

Cortinovis 16 inch Diameter Rigid Strander 1+6+12+18

50C-151

Armoring Cage 52 wires, 400 mm

50C-153

Watson 61 Wire 6+12+18+24, 24 inch

50C-154

Two 630 mm 1+6+12+18 Rigid Stranders

50C-157

Cortinovis 12+18, 630 mm X 420 mm OAW

50C-158

Gauder 6+12+18, 630 mm X 325 mm OAW

50C-159

Cortinovis 12+18+24, 700 mm X 400 mm OAW

50C-160

Krupp 1+6+12+18, 27 inch Rigid Stranding Line

50C-161

1+6+12+18+24, 400 mm Rigid Stranding Line

50C-163

Queins/Caballe 6+12, 630 mm Rigid Stranders motors no control

Return to INDEX

DRUM TWISTERS

50D-100

Pourtier 2500 mm Drum Twister, 1992, 80 rpm

50D-101

Caballe 1250 mm Drum Twister, 1995, 180 rpm

50D-102

Caballe 1250 mm Drum Twister,  1992, 180 rpm

50D-105

Ceeco 2240 mm (88 in) Drum Twister, 1986, 1800 mm Rotating Pay-off, Rotating Cat Capstan

50D-106

2500 mm Drum Twister, Year 2002, 100 mm cable diameter.

Return to INDEX

SWAGERS

51-133

Torrington 5/8 inch 4 die Swager

51-135

Fenn 3 F Swager

51-136

Torrington 4 Die Swager, Yr. 2000

51-138

FENN 8FS Stationary Swager 3.4 inch capacity Solid

51-142

FENN 4F Swager 15/16 inch Solid Capacity 2.25 inch Tube, 4 Die

51-143

Torrington mdl 211 Swager 2 die

51-144

Torrington Mdl 3 Swager 2 die

51-145

FENN 5F Swager

 

SPOOLERS / TAKE-UPS

52-161

Davis Electric 24inch dual Take-up

52-175

Sket 10 inch diameter shaft type spooler

52-185

Davis Electric 16 inch Parallel axis  Dual Spooler

52-190

Syncro DFH 30 inch diameter Bare Wire Spoolers (2 available) 10 HP

52-191

Syncro DFH 30 inch diameter Bare Wire Spoolers (3 available) 20 HP

52-193

Niehoff 800 mm Vertical Static Spooler

52-196

KOCH KHS 1000 Spooler Steel Wire 800 mm Flange Diameter

52-199

Lamnea Bruk DSPM 5000 spooler, year 2000

52-200

Lamnea Bruk VSPM 2500 spooler, year 2000

52-201

Niehoff 500 mm Dual Spooler, full speed change over, electrics updated 2009

53-231

BHS Single Head Pail Pack 14 inch, (10 Available)

53-232

Wyrepak 6 Head Pail Pack/Barrel Packer

53-237

WYRE PAK 20 inch X 10 inch Barrel Packers (2 avail)

53-240

Davis Standard dual extruder line take up 22 inch 24 inch x 1 inch arbor 11. inch tarverse

53-249

Bartell 30 inch shaft type take-up motorized

53-250

Trafalgar 84 inch Shaftless Take-up

53-255

Bartell 10 Inch Diameter Belt Driven Shaftless Take-ups (10)

53-258

EMG 34 head shaft type take-up

53-259

Reel-O-Matic 15,000 lb, 96 inch, with traverse.

53-260

Skaltek 26T 1200 to 2600 mm diameter, 12,000 kg

53-262

Davis Standard 30 inch dual spooler

53-263

New England Butt 50 inch shaft type

53-266

Tulsa Dual 36 inch Take-up

53-268

Davis Electric 72" take up

Return to INDEX

TUBE

55-121

Stainless Steel Tube Forming and Welding line

55-122

Copper tube drawing plant 3,000 tons per year

55-123

SMS Meer Tube Drawing and Coiling block

55-124

MRB SCHUMAG tube Coiler type : VNC 84

55-125

Tube forming mill

55-126

Pulzer CNC 25L Tube Bender 25 mm diameter tube 2 m long

Return to INDEX

TESTING

56-107

Tensitron model TR-2000 HC Mechanical Tension Meters

56-113

Phenix Tech. AC Dielectric Test System Model 6TCE15-105X

56-114

Instron 1011 Dual Column Benchtop Tensile / Compression Tester

56-115

Sikora and Beta Laser Diameter control

 

 

Return to INDEX

WEAVING LOOMS

57-116

Jager Model SD600, 48 inch width (two available)

57-117

Jager Model RG200 1 to 6 mm diameter, 2200 mm width Deiters KA-7 crimping machine

57-118

Jager 3 machines, 7- pick/min, .1 to .7 mm and 6 Trinca

Return to INDEX

BUTT WELDERS (Non-Ferrous)

58-145

Micro Weld Wire Annealers

58-164

Heintz Koldweld Butt Welder 1H H334 A, 1/4inch Aluminum, 3/16inch Copper

58-165

Microweld J8A Aluminum Rod Butt Welder

58-173

Micro Weld J8C Copper Butt Welder

58-183

Microweld Butt Welder Model E1C Capacity .015 to .050 (0.38 mm – 1.3 mm) Copper

58-201

Schlatter Type M Butt Welder

58-202

Ideal Butt Welder DSF 090, 1.5 to 5 mm Copper

58-206

H&W Pressure Welding Mdl.: M101

58-207

PPWC Koldwelders (2 available) Mdl 5 and 5 ER, Year 1998

58-208

Heintz Corp. Mdl. KBM5 cold pressure welders (2 available)

58-209

Microweld J5C (3 available) .08 to .25 Copper

58-210

Microweld J7C .125 to .375 copper

58-211

Microweld J5C Butt Welder

58-215

Microweld GP-1 8 to 20 awg Copper Strand

58-224

BWE Cold Welder Model CW4E Air operated (2 Available)

58-225

Fastener Engineering Model BW-500

58-226

Microweld Model J45C .081 to .182 inc (2 to 4.6 mm) Copper

58-227

BWE Cold Welder Model CW2E

58-228

Microweld Model J4C, 110 V .050 to .125 inch (1.27 to 3.175 mm) Brass/Bronze

58-229

Microweld Model J7C, 460V, .125 to .375 inch (3.175 to 9.53 mm) Copper

58-230

Microweld Model E1C, 115V, .015 to .05 inch (.381 to 1.27 mm) Copper

58-231

BWE CW3E Cold Welder

58-232

PWM Cold Pressure Welder Model BM10 (2 avail)

58-233

Koldweld BM9

58-234

PWM M-101 Cold Welder

58-235

Heintz Koldweld BM7 H (2 avail) no carts

58-236

Hakusan BFY-19T Coper Stranded Butt Welder 80 to 400 sqmm

58-239

Micro Weld J5C .080 to .25 inch

Continue…Butt Welders for STEEL

BUTT WELDERS (Ferrous)

58-178

MicroWeld Butt Welder E1S, 0.020-0.040 steel

58-189

August Strecker Butt Welder Type 0-SC (4 Available)

58-190

Schlatter Butt Welder S-2 with Micro MTAN1 Steel annealer 0.010 - .062inch

58-191

Schlater Butt Welder S-2.5 with Micro MTAN-1 Annealer

58-192

Schlatter Butt Welder Type S-2.5  (25 avail) and Type S-2.0 (2 available)

58-194

IDEAL Butt Welder DC04 460 V, 0.4 mm Steel

58-195

IDEAL  Butt Welder DCE 030  460 V, 0.3 mm Steel

58-196

IDEAL Butt Welder DS3 3 mm, grinding wheel, 10 amps Steel

58-197

Microweld Butt Welder MTE-1 .020 –.047 Cord

58-203

Microweld E1S Butt Welder

58-218

Ideal DSH 180 Steel Butt Welder 18 mm Max

58-219

Hakusan Heat Pressure welder for steel Model BSH -15 5.5 to 14mm

58-238

Ideal DSH 090, 460 V50/60 Hz

58-242

Welding Tech, Inc. Model BT200L 480 V, 200 KVA Diameter Range: 0.5 to 1 inch steel

58-243

Tainan Cheng I 30 Kva Butt Welder 6 to 18 mm steel 2007

58-244

Tainan Cheng I 5 Kva Butt Welder 2.5 to 6 mm steel 2007

58-245

Microweld HX .125 to .75 (3.18 to 19 mm) (2 avail)

58-246

Microweld TH-D .125 to .5 (3.18 to 12,7 mm)

Return to INDEX

ROD WIRE DRAWING (Non-Ferrous)

59A-224

Frigerio TS45-13-1, 13 die Tandem Rod Machine CCS. With Spooler and Coiler

59A-251

Syncro FX-13 Rod Machine Ent 8 mm Finish 3.665 to 1.628 mm

59A-258

Syncro 18T 13 die Tandem Aluminum Rod Drawing Line

59A-261

Henrich 4 die rod breakdown machine Only (no Motor)

59A-265

Niehoff M85, VG35V annealer and WF800 Coiler, 2012

59A-267

Henrich 17 die, Niehoff R500 annealer. Partial line: no take-up.

59A-271

Sket Rod Machine, Niehoff R500 and Bongard Coiler 850 mm

59A-273

Niehoff MM85 and Vaughn Copper Rod Drawing Lines

59A-275

4 X 26 inch diameter blocks, 65 HP each block, ent 12.5 mm copper rod

59A-276

Niehoff M85 8 die, Fin 2 to 3.5 mm, Annealer and dual Spooler, 1994

59A-277

Niehoff M-375 13 die Step Cone.

59A-278

SICTRA 13 Die Tadem Drawing Line in storage ready to ship.

59A-279

SICTRA 13 Die Tadem Drawing Line, Anlr, Dual Splr and Drop Coiler (Video in production)

59A-280

Vaughn T-57, 6 die enter 9 mm

59A-282

Niehoff M85, 13 Die with Coiler. Year of Mfg 2010

59A-283

Niehoff MM85 with inline Annealer motor and controls, No Take-up

59A-287

SICTRA 15 Die Tandem with annealer spooler and coiler

59A-288

Niehoff M85 with pointer stringer, Enter 8 mm copper fin. 1.35 mm

59A-289

Syncro 10 Die tandem, VG-85 annealer, 36 inch coiler

Return to INDEX

INTERMEDIATE WIRE DRAWING (Non-Ferrous)

59B-196

Niehoff M30, VG30 annealer and 22 inch spooler

59B-198

Niehoff M30, VG30 Annealer and S630 Spooler. (price reduced)

59B-199

Henrich 17 die, enter 3.5 mm Cu, fin 0.4 to 1.2 mm, Anneal and dual spool

59B-200

Niehoff M30, VG30 Annealer and Spooler.

Return to INDEX

FINE WIRE DRAWING (Non-Ferrous)

59C-292

SAMP TRB-5 Annealer and Spooler

59C-311

BG-16 C3 annealer 16 inch spooler 4 available

59C-320

Niehoff M15 with annealer and SNH631 Spooler Ent 2 mm Fin .26 to .7 mm

59C-333

DeAngeli MultiWire ent 1.8 mm fin. 38 to 26 awg, 1990

59C-338

Syncro AG 16 with Spooler. Installed and operational

59C-339

Syncro BG 16 with spooler Installed and operational

59C-342

Niehoff MMH80 8 wire drawing machine, R160 Annealer, 560 mm spooler

59C-343

Samp Mt 12-7-18-bw 7 Wire enter 2.5 mm copper finish 28 awg

59C-346

Niehoff M25 Ent. 2.51 mm (10awg) Finish .15 to .70 mm (35 to 21 AWG)

59C-348

Samp 12 wire, Year 1997 W/ dual spooler, annealer complete running until Jan 2023

Return to INDEX

ROD WIRE DRAWING (Ferrous)

60A-237

Macbee Model 6-24-B/C-60 6 block, 24 inch, 60HP/block, with Spooler

60A-258

Frigerio Wet Type Steel Wire Drawing 13 Die, Model TS45-13, Year of Mfg 2002. Enter 5 mm

60A-293

Tecnocable 8 Block OTT, no controls no take-up

60A-306

OZ Cams TRD 610/560, yr. 1990 Enter 6.5 mm finish 2 to 2.5 mm (3 avail) 4, 6 and 8 Blocks

60A-308

Macbee 4 block, 22 inch diameter, 15 HP AC motors, with spooler (store outside)

60A-309

FENN 5 Block Dry Draw. Ent .406 (10 mm) fin. .125 to .3 inch HC Steel

60A-310

BHS Torin 5 Die Dry Draw Enter .375 (9.5 mm) fin .120 to .3 inch HC Steel

60A-311

EuroDraw MTS 900 3 block Enter .531 (13.5 mm) Fin .250 to .360 in HC Steel +1 8608731423

60A-312

Morgan 5 Blk, w/ Dead Block Coiler, ent .25 fin 096, 3000 fpm, 100 HP each Blk.

60A-313

Mekosan 5 block 800 mm, 45 Kw/ block, year 2009, ABB drive, siemens PLC

60A-315

Sket 6 block 500 mm 22 kw/block

60A-316

Sket 8 Block 550 mm 30 kw/blk

60A-317

Arboga 7 Block incline machine no po no tu, 760mm dia.

60A-318

Breitenbach 6 block, 1970s ent 7mm fin 2mm (still installed and running till Nov 22)

60A-319

Eurodraw 610 mm, 9 die, 45 Kw (60HP) per block year 2000

60A-320

Frigerio 10 block with coiler ent 5.5/6.5 mm, Year 1988

60A-325

Eurodraw Two wire, 14 die with 2 spoolers, 1999

Return to INDEX

INTERMEDIATE WIRE DRAWING (Ferrous)

60B-147

11 Die HC ent 3.2 mm fin .89 mm (2 available)

60B-151

Vaughn 12 HIC, 12 inch dia. Vertical finish capstan, no control, no spooler

60B-155

OZ Cams TRB 350 Enter 3.5 mm Finish .6 mm (4 Available) 350 mm blocks

60B-156

Frigerio RT500-113 Yr. 1997, ent 4 mm Fin. .6 mm 11 die

Return to INDEX

FINE WIRE DRAWING (Ferrous)

60C-151

Vaughn 12 HF Steel Fine Wire Drawing. 12 Dies, ent .080 (2 mm)

60C-159

Koch 25 die, 3 wires, with spooler. Ent. 1.4 mm

60C-161

Vaughn 12 HICX Enter 3.43 mm Low Carbon 2.68 mm HC with spooler

60C-162

Vaughn 12 HIC Enter 2.68 mm Low Carbon 2.03 mm HC with spooler

60C-164

Wet Draw Fine Wire 21 dies ent 3 mm finish .45 mm, with take-up

60C-165

Vaughn 12 HF Wire Drawing

Return to INDEX

MISCELLANEOUS

61-105

Pettibone 6,000 lb. Fork lift Truck Propane

61-168

Conair Extrusion Vacuum pump

61-176

5 HP AC motor, 1749 RPM, 230/460 volts, 13.6/6.8 Amps, 60 Hz, 3 Phase

61-199

Farrel Rubber Mill 12inch X 6inch rolls 7.5 HP

61-223

Thermco Gas Mixer 0 to 20 % Model 8400 Hydrogen and Nitrogen Gas

61-233

Videojet Ink Jet Printer Model EXCEL 170i

61-236

Esteves and Ballofet Natural Diamond Dies 0.309 mm to 1.604 mm, 3665 available

61-239

Natural Diamond Dies 8 mm x 25 mm, Various sizes, 27,000 available

61-248

Coil Compactor Steel Coils 3000 lbs

61-252

Davis Standard vertical dancer 8 inch sheaves

61-266

TEC Dancer/Accumulator Model MWD-8/40

61-272

Agir Shaving Head 18 mm max diameter

61-273

Accumulator Dancer 24 inch diameter sheaves, 540 ft accum, 25ft high

61-274

Davis Standard Dancer/Accum, Mdl. M-48-9, Yr. 2007

61-278

Tubular Coil Wire Carriers

61-279

TEC Dancer HDDA/36 36" sheaves 2" dia. 80 ft accumulation

61-280

Tubular carriers 22.5 x 48 x 42 base

61-282

Inkjet Printers Imaje 2 X 9040 Contrast and 1 X Jaime 1000S8

61-283

Cushman electric carts movers

61-284

Markem 600S cable taping and cutting. Self-contained wet cut system

61-286

Allis Chalmers ACC100 10,000 lb capacity, Propane

61-288

Bartell 30 inch take-up traverse unit

61-289

Filtertech scf-1600 filter system

REELS, BOBBINS, and SPOOLS

61R-100

Plastic 6.5 inch x 3-1/2 inch x 4-1/4 inch x 3-1/2 inch drum 5/8 inch arbor

61R-101

22 X 12.75 X 5 inch arbor 130 lbs (30 available)

61R-103

6.3" 160 mm X 114 X 90 mm traverse plastic reels brand new 5,000 available

61R-104

Plastic clip hacoba Bobbins 66mm x 69mm x 16mm; 16,000 Available

61R-105

10" dia. x 6" Trav. X 1 1/4 bore x 4" drum x 7" OAW weight 3.5 lbs. plastic

61-237

Steel Reels 60 inch flange X 36 barrel X 30 trav

61-238

Steel Reels 630 mm to 1200 mm diameter 127 mm arbor

61-241

Plastic Spools 6.0 inch OD X 4.25 OAW X 3.5 T X 3.5 BD X ¾ inch arbor (1000)

61-256

Steel Reels 44 inch diameter X 28 inch traverse X 22 inch Barrel X 5 inch Arbor

61-268

16 and 18 inch steel and plastic reels

DRUM TWISTERS

62-131

Ceeco 3000 mm Armoring

Return to INDEX