MATHIASEN MACHINERY, INC.

ANNEALERS
· Ref. #10-123 Lee Wilson Engineering Bell type 96” and 114" dia.,. 1650oF
· STRAND HEAT TREATING LINES:
· One (1) Cortinovis Strand Size Range 8 - 18 mm, max speed 2 m/sec. Direction L.R., year 1974
· One (1) Cortinovis Strand Size Range 8 - 12.5 mm, max speed 1 m/sec. Direction L.R., year 1989
· WIRE HEAT TREATING LINE:
· One (1) MRB Strand Size Range 4 - 7 mm, max speed 220 m/min. Direction L.R., year 1990
 10-189 Lindberg HYAM Ammonia Dissociator
 Ref. #:  39-124 Complete High Carbon Wire Galvanizing Plant

BARBED WIRE  MACHINERY
· Ref. #:  39-123 Wafios Nail, Staple and Barbed Wire Plant, N-2, N-3, N-4, N-6, S-200, S-110, DSC-29, STH-2
 

BENDING / FORMING
· Ref. #14-108 EVG Polibend 12 Straighten and Cut and Bending Year of Mfg. 1995
· Ref. #14-114 Chain Making Machinery to Manufacture Grade 8 (80), 3 (30), 4 (40) Chains

BRAIDERS
· Ref. #15-117 Spirka 16 Carrier Model 16 NG 4, 9 Available
· Ref. #15-118 Wardwell 16 Carrier Braiders, 50 Available, New 1984 to 1999
· Ref. #15-119 Spirka 16 Carrier Model 16 N 4
 

BULL BLOCKS
· Ref. #16-156 Morgan Double Deck Vertical Bull Block Size 2 Top 15.5” Bot. 12”
· Ref. #16-156 Vaughn #12, 22” dia, 57 hp motor, Ent 12 mm rod.
· Ref.#16-178 Vaughn No. 22, 30” dia. block, enter 3/4”, finish 11/16”, 100hp
· Ref. #16-179 Doubledeck bull blocks 16” dia., 3 hp motors
· Ref. # 16-180 Vaughn 12-22, 24” dia. block, 60 HP, 500 fpm, Capacity 1-1/16” Low Carbon
  Ref. # 16-183 Roth Cold Rolling / Drawing Line, Double Deck Bull Block with 39" spooler 1973

FENCE
· Ref. 19-116 Bergandi 2mt chainlink fence, 12 ft. width, 1976
· Ref. 19-119 Hinge Joint Fence Machine, 19 wire feeder, 11 vertical at 55” high, 6” spacing
  Ref. 19-120 Wafios VDF80 Chain Link Fence Machine. 12 width, Double Spiral. (PHOTOS)
 

DEAD BLOCK COILERS
· Ref. #20-118 Vaughn Model H40 Torqwynd. Drum size 20" O.D. x 30" High
· Ref. #20-147  36” downcoiler, with turntable, 30 hp motor
· Ref. #20-151 OZ CAMS Drawing Dropcoiler.  660 mm dia., 55 Kw Motor, 1987
· Ref. #20-153 1993 EIWA Model EG-09, Block dia.: 760 mm (30”), 50 HP, Wire range: 5.5 mm - 8 mm
. Ref. #20-155 Tecnocable Deadblock 500 mm diameter, 10 HP
· Ref. #20-156 BHS Torin 26” dia. Inverted Gravity-Type Bull Block, 75 HP Motor
 

DESCALERS
. Ref. #22-104 Wheel Blast Descaler
. Ref. #22-105 EIWA Model ED-C-8 and Model ED-C-9 Mechanical Descaler
. Ref. #22-107 Decapador Mechanical Descaler Model M.64

DRAW STRAIGHTEN AND CUT
· Ref. #23-118 Schumag KZR-1, Steel 4-13mm, 20 ft runout, polisher, 6600 Lbs/pull
· Ref. #24-108 Aetna Drawbench, medart straightener, 75,000 Lbs/pull single draw.
· Ref. #23-124 Schumag KZRP-IB
· Ref. #23-131 Schumag KZR0B

MESH WELDERS
· Ref. #34-140 84” width mesh welder, roll take up, 60 strokes/ min., (11) 40 kva transformers
· Ref. #34-152 EVG Max welding width 81.5”, width adjustable by .500”, 25-17 ga. wire dia.
· Ref. #34-155 Schlatter PG-28 Mesh-welder.
· Ref. #34-163 Schlatter PG-24 Mesh-welder.
 

NAIL / STAPLE MACHINERY
· Ref. #35-154 BILWINCO High Speed Nail Packaging, Weigh, Box, Label, Glue, and Pack.
· Ref. #35-157 Wafios Model N-2, 6 available.
. Ref. #35-158 Moroni Model SPN 170, 2.4" to 6.6" long nails, 150 Nails/min.
. Ref. #35-167 WAFIOS N-31 700 Nails/min.

COMPLETE PLANTS
· Ref. #:  39-118 Grade 8 chains 8to20mm dia
· Ref. #:  39-119 Hexagonal Netting Machines Wafios, Ruppel
· Ref. #:  39-121 PC STRAND PLANT MRB, OTT, BABCOCK, CORTINOVIS
· Ref. #:  39-124 Complete High Carbon Wire Galvanizing Plant
· Ref. #:  39-131 Complete Wire Weaving Plant

ROLLING MILLS
· Ref. #:  44-128 Ruesch single stand,2 rolls, 4.5” dia.,two plane str., 18” take up
· Ref # 44-129 Standard single stand, 5.5” dia. rolls,two plane straightner
· Ref. #44-130 Waterbury Farrel 3 Stand Wire Flattening Mill, Roll Size: 8” X 2.5”
· Ref. #44-131 DECA Rollex 5 Stand Wire Flattening Mill, With inline Bull Block
· Ref # 44-136 Fenn  3 Stand High Carbon Rolling Mill.  For fine shaped rolled products
  44-137  Torrington 3 Stand and 2 stand

ROLL POINTERS
· Ref. # 45-117 Vaughn Roll Pointer, 2 Roll, 10 grooves, Cap. 3/8”
· Ref. # 45-119 RENCO Roll Pointer, 4 Roll, two plane, 2 X 7.5 HP Motors

Back to MMI Home

WEAVING LOOMS
· Ref. # 57-101 Jager Weaving Looms, Models DFS, St-Dsa, DF1, and EFSa
· Ref. # 57-102 Jager and Bulgaro Weaving Looms Model SD 500
 
 

SPRING COILERS / FOURSLIDES
· Ref. #48-104 Bihler Vertical FourSlide, Model RM-35, New in 1998

STRAIGHTEN AND CUT
· Ref. #49-173 Shuster Model # A1 Capacity: 7/8” Round,  3/4” Hex
· Ref. #49-175 Shuster Model # 1 AVS 3, Wire range  .062" - .187"

PLANETARY CABLERS
. Ref. # 50A-140 6+1, Planetary strander, 1 meter reel dia., capstan/take up.
· Ref. # 50A-141 6 Bay 60” heavy duty Planetary Closer.

TUBULAR STRANDERS
 Ref. #50B-113 Bartell 6,12,18bays, 6”and 8”dia. reels
 Ref. #50B-140 Syncro 7+1, 22” dia. reels, 30 dual capstan
 Ref. #50B-141 Bema, 6 +1,22” dia. reels, 30”dia. Capstan 650 RPM.
 Ref. #50B-146 Bartell 12 Bay, 6” reels
 Ref. #50B-147 Bartell 6 bays, 6”dia. reels
 Ref. #50B-161 Watson 7+1, 24” dia. reels, dual capstan, 60” take up
 Ref. #50B-170 Bartell 18+1, 8” dia. reels, capstan, take up, 4 available
 Ref. #50B-162 Watson 2/3 strander, 22” dia. reels, 36” capstan, take up
 Ref. #50B-165 Sket 6,12,18 bays, 6” dia. reels, encircling bearing, 3600 rpm,capstan, take up.
 Ref. # 50B-175 Watson 18+1 Tubular Strander 10" dia.  X 6"
 Ref. # 50B-176 Stolberger 6+1, 560 DIN reel. encircling bearing, 800 RPM, dual capstan, take up
 Babcock 6 +1 Bobbin 34" Dia.  450 RPM, with (72”), Year 1968, encircling bearings
 Babcock 6 +1, 34" Dia., 500 RPM, with Take-up (72”), Year 1974,
 Ref. #50B-179 SKET 6+1, 400 mm dia. reels, dual capstan, 1400 RPM
 Ref. #50B-183 Hanson & Edwards 6+1, 34” dia. reels, encircling bearings, 450 RPM
 Ref.# 50B-184 BARTEL 6B62, 6 bay, 6.5” dia., Tubular Stranders with 30" take-ups New 1983
 Ref.# 50B-198 KRUPP, 12 bay, 26” dia., Tubular Stranders with 96" take-up
50B-201 Ceeco: 6+1,  25" dia  max.,  Speed: 960 rpm, Encircling Bearings
50B-202 Ceeco: 12+1,  25" dia  max.,  Speed: 1000 rpm, Encircling Bearings
 Ref.# 50B-204 BARTEL 6B62, 6 bay, 6.5” dia., Tubular Stranders with 30" take-ups
 Ref.# 50B-207 WMCA 41 Bobbin, 14 inch dia Tubular Strander with 48" Take-up
 Ref.# 50B-208 WMCA/WATSON 36 + 1, 8" Dia Tubular Strander with 36" dia Take-up
 

RIGID CABLERS
· Ref. #50C-118 NEBUTTCO 54 Bobbins Rigid Wire Strander, payoff 1600 mm reel, 1400 mm width, 12 + 18 + 24, 31"
                          diameter, 112 kw motor, Dual Wheel capstan 1800 mm, Roll thru take-up 2400 mm floor traversing
· Ref. #50C-119 WMCA 37  Bobbin Rigid Wire Strander 6 + 12 + 18, 21" diameter  reel,  40 HP motor, 1600 mm Dual
                           Wheel capstan, 1800 mm Shaft type take up
 

SPOOLERS
· Ref. #52-144 Acrometal Reeless Spooler 22” od X 10-1/2” traverse motor: 2 HP
· Ref. #52-145 Syncro re-spoolers 22” X 11” traverse 5” arbor, 5 hp motor
· Ref. #52-151 Syncro 30” dia. reel, 15 hp motor, (4) available

TAKE UPS
· Ref. #53-186 New England Butt, 60” to 84” dia. take ups
· Ref. #53-187 Watson 96” max reel take up
· Ref. #53-206 Rosendahl TW 1000 G, 40" Dia.
 

RIGID CABLERS
NONE AVAILABLE AT THIS TIME 11/1/00

Back to MMI Home

• Ref. # 58-136, Hakusan Buttwelder, Model: BS-13, Capacity: 7 to 13mm
• Ref. # 58-140 MICROWELD Mdl J4-5, SEMT & ACMT; STRECKER Mdl 1 & 0;  IDEAL Mdl DSHO 25&35

ROD  DRAWING

•  Ref. #59A-100 Bergfield Shape Line, 3 Drawing Blocks with Turks Heads 100 HP motors
•  Ref. #60A-205 Herborn G16/4-G10/5, 9 Die with drawing dead block coiler, Enter 5.5 mm
•  Ref. #60A-202 OZ Cams, 6 Blk., 24”, hc steel, 50kw/per blk, 22” deadblock coiler, 1990
•  Ref. #60A-200 OTO HI-draw, 6 blk., 22”blks., 22” dia. deadblock coiler
•  Ref. #60A-177 Fenn Model VT 500 Veetrac Block Dia.: 22” Ent.: .315” H.C., 75 hp/blk
•  Ref. #60A-190 Vaughn Model: 4 HRX, Ent. 0.437, Fin. 0.217 - 0.105,  50/60 HP / Block
•  Ref. #60A-194 Herborn D/D bull block w/ EIWA Descaler ,EIWA Dead Block Coiler
•  Ref. #60A-201 Vaughn 5/6 hr, 22” dia. blocks, 30 hp motor/ block
•  Ref. #60A-221 SHOWA,  Model DCD-900 X9  9Die , 900 mm Blocks, Enter 13 mm
•  Ref. #60A-222 Morgan,  Model 6B + 5BB14 = 11 Blocks, with 30" spooler Enter .220"
•  Ref. #60A-223 Morgan,  Model 6BW, 6 - 26" diameter Blocks, with 26" Morgan Deadblock Coiler Enter .220"
•  Ref. #60A-232 OTT,  TORQUEMATIC TOM 8 T 450/ F 450 WITH HORIZONTAL  DEADBLOCK ES-500
•  Ref. #:  39-124 Complete High Carbon Wire Galvanizing Plant

•  MRB 8 die Rod Machine, Year of Mfg. 1970· 30" Dia. Blocks,w/ 1 ton take up. Ent. 7 mm - 13 mm, Fin. 3.2 - 7 mm, Speed 3.5 m/sec Max
•  O.T.T. 7 die Rod Machine, Year of Mfg. 1975· 30" Dia. Blocks,w/ 1 ton take up. Ent. 7 mm - 12 mm, Fin. 2.64 - 7.6 mm, Speed 5.8 m/sec Max
•  MRB 8 die Rod Machine, Year of Mfg. 1967· 30" Dia. Blocks,w/ 1 ton take up. Ent. 7.5 mm - 13 mm, Fin. 3 - 8 mm, Speed 4.8 m/sec Max.
•  O.T.T. 8 die Rod Machine, Year of Mfg. 1989· 30" Dia. Blocks,w/ 6 ton take up. Ent. 8 mm - 13 mm, Fin. 3.2 - 8.5 mm, Speed 8.6 m/sec Max

FINE WIRE DRAWING
· Ref. # 60C-126 Vaughn 4-TWC-21, Ent. .080” Fin. .015”/.006”, 21 dies, 2630 fpm,.8”spooler.
· Ref. # 60C-130 OZ Cams 2 wire, mdl TCO4/21, Ent. .071”, fpm 4920, 87 hp motor, spooler
  Ref. # 60C-131 Herborn HT18, 19 die, 14.5 - 17 % reduction Enter 1.8 mm Fin. 0.20 mm
· Ref. #60C-120 VAUGHN  Model #: 12 HIC AND 12 HIC-XX, Ent. 0.104” High Carbon
· Ref. #60C-132 VAUGHN  Model #: 12 HF Enter .032" - .051”,  Finish (.013" - .030”)
· Ref. #59C-117 Waterbury Farrel no. 1, 16 dies, with motor and spooler (5) avail.
· Ref. #59C-234 Niehoff M5, 21 dies,ceramic blocks, sg45 spoolers (10) avail.
· Ref. #59C-249 Bekeart Model KDD Fine Wire Drawing.
 
 

 Please contact us with your machinery requirements!

email us at mmi@mathiasen-machinery.com

  back to top of page