Specifications


MMI LogoMATHIASEN MACHINERY, INC.

TWISTING MACHINERY / EXTRUSION LINES / ROD DRAWING

click on highlighted reference number to see photo(s)

BUNCHERS, CABLERS, RIGID STRANDERS, TUBULAR STRANDERS

17-901
Northampton SLB 800 Double Twist Bunchers (2 available) Year 1996, were running 12 and 10 gauge wire. 36 X 21.5 X 19.5 X 15 B X 3 inch (7 reels available)

17-902
SETIC 1600 mm Double Twist Cabler, 30 inch diameter capstan Uninstalled and ready to ship.

17-903 Queins 4 wire 3 bay Skip Strander. 2000 mm diameter PO reels. Line includes spark tester, Belt Capstan, 200 ft overhead accumulator, 2 X Skeltek U18 take-ups, 1 X Cecco 96 inch take-up

17-904
Cortinovis 2000 mm Double Twist Cabler, up to 36 wires from stems. In 6 ft deep pit. Reel size 79 X 53 X 48 X 44 X 5 inch (16 available), 40 inch dual wheel capstan. Rotating single wheel capstan.

17-905
Cook 48 inch Single Twist Cabler, 9 wire pay-off, taping head, Year 1974, 60 HP DC motor, Reels 48” Diameter X 30” Wide X 22 inch barrel steel and wood, 22 reels available.


50B-901
Ceeco 6+1, 630 mm Encircling Bearing Tubular Stranding Line. Speed 600 rpm. Inside String up. Includes: 60 inch shaftless pay-off, motorized 48 inch dual wheel capstan 5 X 5 1 inch wide grooves,  motorized AFA walk thru shaftless 96 inch take-up. Reels 24X16X14X15X7inch (about 70 available). Allen Bradley touch screen control station. 4 ga – 500 mcm

50C-901
Watson 6+12+18+30 Rigid Stranding Line, Sections 6, 12, and 18 max reel diameter 22 inch; 30 reel section max reel diameter 24 inch. Was used as a 61 wire with 22 inch diameter X 12.5 wide X 5 inch arbor reels. All shafts are 14 inch long X 5 inch diameter. Speed 99 RPM, 2 ga 750 MCM. Line includes Cecco Tape Head, Watson 60 inch dual wheel capstan, 6 X 5 2 inch wide grooves. Bartell 84 inch Powered Take-up

50C-902 IWR Rigid Strander 18 + 24, 30 inch, Reels: 30X13X11X15X5 inch 150 available. Rope brakes, Dual wheel 40 inch diameter 5X5 2 inch groove capstan, Ceeco 96” cantilever shaftless take-up

50D-901
Queins/Poutier/Krupp 2200 mm Drum Twister Line. 4 X Krupp rotating 72 inch pay-offs, two stationary 72 inch payoffs, quad tangential taping head, Poutier 72 inch rotating caterpillar capstan (year 2019), Queins 2200 mm drum twister (year 2010), 65 inch max width, in 3 ft pit. Pay-off reels steel 70X46X39.75 traverse 20 available. Total length of line approximately 125 ft.

Extrusion Lines and Extruders


27-901 XLPE Line Davis Standard round gearbox 4.5 inch 20:1 Polyethylene Extruder, in tandem with Davis Standard 4.5 inch 24:1 Square Gearbox Extruder. Includes: Skaltek A224K Pay-offs, Pay-off and Take-up Accumulators, Stolberger Cat Capstan, Skaltek U20T Take-ups. Delta Plast 1.5 inch, striper Extruder

27-902 THHN Extruding Line, Year of Mfg.: 2007, Davis Standard 6 inch 24:1 PVC extruder (no loader), Davis Standard 3.5 inch, 24:1 Nylon extruder color mixer loader. Producing 2 ga – 700 mcm cable. Includes: 3 X Zumbach Diameter gauges, Skaltek Pay-off and Take-ups each with an accumulator, cooling troughs,

Rod Drawing Lines

59A-901
SAMP MS400 13 die aluminum rod breakdown line. SAMP 800 mm Dual Spooler

59A-902
Niehoff M85 11 die aluminum rod breakdown line. SAMP TE85 single Spooler

20-901 Syncro 30 inch diameter continue coil. Drop down coiler was running with a Syncro FX-13 copper Rod drawing machine.

PHOTOS

17-901
Northampton SLB 800 Double Twist Bunchers (2 available) Year 1996, were running 12 and 10 gauge wire. 36 X 21.5 X 19.5 X 15 B X 3 inch (7 reels available)
Buncher
Bunching
17-902
SETIC 1600 mm Double Twist Cabler, 30 inch diameter capstan Uninstalled and ready to ship.
double Twist Buncher
17-903 Queins 4 wire 3 bay Skip Strander. 2000 mm diameter PO reels. Line includes spark tester, Belt Capstan, 200 ft overhead accumulator, 2 X Skeltek U18 take-ups, 1 X Cecco 96 inch take-up
Skip Strander   skip
17-904
Cortinovis 2000 mm Double Twist Cabler, up to 36 wires from stems. In 6 ft deep pit. Reel size 79 X 53 X 48 X 44 X 5 inch (16 available), 40 inch dual wheel capstan. Rotating single wheel capstan.
bunchercapstan
17-905
Cook 48 inch Single Twist Cabler, 9 wire pay-off, taping head, Year 1974, 60 HP DC motor, Reels 48” Diameter X 30” Wide X 22 inch barrel steel and wood, 22 reels available.
Cook Cabler
Extrusion Lines and Extruders

27-901 XLPE Line Davis Standard round gearbox 4.5 inch 20:1 Polyethylene Extruder, in tandem with Davis Standard 4.5 inch 24:1 Square Gearbox Extruder. Includes: Skaltek A224K Pay-offs, Pay-off and Take-up Accumulators, Stolberger Cat Capstan, Skaltek U20T Take-ups. Delta Plast 1.5 inch, striper Extruder
Skaltek davis standard extruder
27-902 THHN Extruding Line, Year of Mfg.: 2007, Davis Standard 6 inch 24:1 PVC extruder (no loader), Davis Standard 3.5 inch, 24:1 Nylon extruder color mixer loader. Producing 2 ga – 700 mcm cable. Includes: 3 X Zumbach Diameter gauges, Skaltek Pay-off and Take-ups each with an accumulator, cooling troughs
Skaltek  Extruder THHN XLPE
50B-901
Ceeco 6+1, 630 mm Encircling Bearing Tubular Stranding Line. Speed 600 rpm. Inside String up. Includes: 60 inch shaftless pay-off, motorized 48 inch dual wheel capstan 5 X 5 1 inch wide grooves,  motorized AFA walk thru shaftless 96 inch take-up. Reels 24X16X14X15X7inch (about 70 available). Allen Bradley touch screen control station. 4 ga – 500 mcm
Cecco Tubular Strander
50C-901
Watson 6+12+18+30 Rigid Stranding Line, Sections 6, 12, and 18 max reel diameter 22 inch; 30 reel section max reel diameter 24 inch. Was used as a 61 wire with 22 inch diameter X 12.5 wide X 5 inch arbor reels. All shafts are 14 inch long X 5 inch diameter. Speed 99 RPM, 2 ga 750 MCM. Line includes Cecco Tape Head, Watson 60 inch dual wheel capstan, 6 X 5 2 inch wide grooves. Bartell 84 inch Powered Take-up
Rigid Strander
50C-902 IWR Rigid Strander 18 + 24, 30 inch, Reels: 30X13X11X15X5 inch 150 available. Rope brakes, Dual wheel 40 inch diameter 5X5 2 inch groove capstan, Ceeco 96 inch cantilever shaftless take-up
Rigid Strander
50D-901
Queins/Poutier/Krupp 2200 mm Drum Twister Line. 4 X Krupp rotating 72 inch pay-offs, two stationary 72 inch payoffs, quad tangential taping head, Poutier 72 inch rotating caterpillar capstan (year 2019), Queins 2200 mm drum twister (year 2010), 65 inch max width, in 3 ft pit. Pay-off reels steel 70X46X39.75 traverse 20 available. Total length of line approximately 125 ft.
Drum Twister
59A-901
SAMP MS400 13 die aluminum rod breakdown line. SAMP 800 mm Dual Spooler
Samp Wire drawing
59A-902
Niehoff M85 11 die aluminum rod breakdown line. SAMP TE85 single Spooler
Niehoff rod drawing line
20-901 Syncro 30 inch diameter continue coil. Drop down coiler was running with a Syncro FX-13 copper Rod drawing machine.
coiler